Pyle PLTS76DU User Manual - Page 23

Touch Screen Operation Storing and Listening to a Memory station Setting Memory 87.50 FM1 MHZ DX ST USER 1 88.50 2 90.00 3 98.00 4 106.00 5 103.00 6 80.50 With this system, a total of 30 stations can be stored in the memory of six buttons. Each band stores up to six preset stations. The stations might be FM1, FM2, FM3, AM1(MW1), and AM2(MW2) band. The operation is as below : - Store in Memory >Select the frequency band >Select the station >Keep the desired memory key pressed in until the station is heard again after a brief interruption . - Retrieve a preset station Touch the 1-6 ranges briefly to retrieve a station which had been stored in the memory in advance the chose number is shown on display . Automatic Preset Setup In Radio Mode, touch and keep (for more than 2 ' S) the screen of " APS " range to active automatic station storage. The radio searches within the current frequency band, e.g. FM1, for the stronger signal level until the search cycle has finished . The six strongest stations are then allocated to the corresponding storage locations . Then the station of the first storage location is set . Scan Function In Radio mode, briefly touch the "APS" section on the touch screen , the radio briefly plays all the preset stations of the frequency band . RDS FUNCTION In Radio mode, touch the "RADIO" ICON to enter the main menu, then touch the " SET " ICON to enter the set mode, the message in the display : (only in the "TA ON" mode. ) REGION PI SOUND ON Automatic Memory Storing & Program Scanning 87.50 FM1 MHZ DX ST USER 1 88.50 2 90.00 3 98.00 4 106.00 5 103.00 6 80.50 Note: the RDS icon displays only when setting EUR FREQ and power off the unit and then power on again. Touch the " RDS " section on the setting menu, touch the " / " ranges to select the adjustment item, touch the " / " ranges to adjust the selectment item , It`s depend on your need to select the different function . Then touch the "SET" range to return to the previous playback . -21-