Pyle PPHP1537UB PPHP837UB Manual 1 - Page 4

SPECIFICATIONS: PPHP1537UB Woofer Impedance 8 ohm Sensitivity 98dB Freq.Resp 30Hz -22KHz Voice coil 75mm,3 inch Magnet 60 oz Tweeter Impedance 8 ohm Sensitivity 110dB/m/w Freq.Resp 600Hz-20KHz Voice coil 1.75" Diameter Material Titanium PPHP1237UB 8 ohm 97dB 30Hz -22KHz 65mm,2.5 inch 50 oz 8 ohm 110dB/m/w 600Hz-20KHz 1.34" Titanium PPHP1037UB PPHP837UB 8 ohm 96dB 40Hz -20KHz 50mm,2 inch 40 oz 8 ohm 94dB 45Hz -20KHz 38mm,1.5 inch 30 oz 8 ohm 110dB/m/w 600Hz-20KHz 1" Titanium 8 ohm 110dB/m/w 600Hz-20KHz 1" Titanium Electrical safety All products are fitted with a detachable power cord (supplied) which connects to the AC mains and the back panel of the loudspeaker. The power cord has an IEC female connector on one end and male mains connectors on the other end. This cord is supplied specially to accommodate the different worldwide safety and electrical code requirements. The power cord supplied with your product has a 3-pin type plug. Do not cut off or damage the grounding plug. Like any electrical appliance, your EON powered speakers should not be used in water or when wet. Product design and specifications are subject to change without previous notice.