RCA M61WH185 User Manual - Page 19

HDMI cable Connections & Setup Note: If the device you're connecting has a digital audio output jack, connect a digital audio cable from the device to an audio receiver for digital audio. OR • If your set-top box has an HDMI jack, connect an HDMI cable. Connect an HDMI cable to the HDMI 1 INPUT (or HDMI 2 INPUT if your TV has this jack and it's more convenient) jack on the back of the TV and to the HDMI Out jack on the back of the device. TV button TV button INPUT button ON•OFF SAT•CABLE TV VCR DVD AUDIO AUX INPUT GUIDE ANT•CABLE FORMAT INFO MENU VOL GO BACK MUTE CLEAR CH ON•OFF SAT•CABLE TV AUX DVD GO BACK VOL CH GUIDE FORMAT MENU MUTE INFO SUB CH CLEAR INPUT ANT•CABLE REVERSE PLAY FORWARD SUBCHANNEL SKIP REVERSE PLAY FORWARD INPUT button RECORD STOP PAUSE RECORD STOP PAUSE CC PRESETS SOUND Use these buttons to view the picture of the device you've connected to the TV (your remote model varies according to the model of TV you have). Viewing the Picture from the Connected Device The device in this connection is connected to the HDMI jack. To view this device: 1. Turn on the TV and the device you want to view. 2. Press the TV button on the remote control to put the remote in TV mode. 3. Press the INPUT button on the remote control to scroll through the Video Input Channels until you see HDMI 1 Input displayed in the channel banner. See picture below for location. Note: You can set up the TV to automatically tune to the correct device you want to view. This is called Auto Tuning. See Chapter 3 for more information on Auto Tuning. Input channel appears here Program Title/Acquiring Channel 12:39 PM HDMI 1 Input • If you are done connecting devices to your TV, go to page 19 to complete the Assisted Setup. • To find out more about connecting audio/video receivers, go to the next page. Chapter 1 17