RCA RCD161 User Manual - Page 18
Maintenance
View all RCA RCD161 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Maintenance EN Cleaning the exterior CD Lens Care • Disconnect the system from AC power before cleaning the exterior of the unit with a soft dust cloth • Clean the exterior with a soft clean cloth or slightly moistened chamois leather. DO NOT use solvents as it may cause damage to the unit. • When your CD lens gets dirty it can also cause the system to output poor sound quality. To clean the lens you will need to purchase a CD lens cleaner which can maintain the output sound quality of your system. For instructions on cleaning the CD lens, refer to the ones accompanying the lens cleaner. Handling CDs • Do not touch the signal surfaces. Hold CDs by the edges, or by one edge and the hole. • Do not affix labels or adhesive tapes to the label surfaces. Do not scratch or damage the label. • CDs rotate at high speeds inside the player. Do not use damaged (cracked or warped) CDs • Make sure CDs are stored in their original case after use. Keep them away from damp, humid or abnormally heated places. Technical Specification Power supply: 120V~60Hz Dimensions ( H x W x D mm): Unit size - 173 x 380 x 263 CD player: Response curve (+/- 2dB): 60Hz to 20 kHz Rating Plate: Look for it at the bottom of the set. Cleaning CDs • Dirty CDs can cause poor sound quality. Always keep CDs clean by wiping them gently with a soft cloth from the inner edge toward the outer perimeter. • If a CD becomes dirty, wet a soft cloth in water, wring it out well, wipe the dirt away gently, and then remove any water drops with a dry cloth. • Do not use record cleaning sprays or antistatic agents on CDs. Also, never clean CDs with benzene, thinner, or other volatile solvents which may cause damage to disc surface. 14