RCA RCR311S User Guide - Page 8
Testing the Code for, Maximum Functionality - manual
View all RCA RCR311S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
RCR311S_NA_IB_REVB_K4.qxd 7/27/04 11:41 AM Page 8 Programming Methods (continued) VCR•DVD VCR•DVD ON•OFF (BLINK) VCR•DVD TV SAT•CBL ON•OFF ON•OFF (BLINK) ON•OFF b. While holding down the VCR•DVD key, press and release the number 2 key on the keypad to control a VCR or the number 3 key to control a DVD. The illuminated ON•OFF key turns off. c. Release the VCR•DVD key. The illuminated ON•OFF key blinks four times and then turns off. Your remote is now either in VCR or DVD Programming Mode, depending on which you chose. Proceed to step 4. 4. Press and hold the component key (TV, VCR•DVD, SAT•CBL) you wish to program. The illuminated ON•OFF key turns on and remains on. 5. While holding the component key down, press and hold the ON•OFF key. The illuminated ON•OFF key turns off. 6. After holding down both keys for three seconds, the illuminated ON•OFF key turns back on. 7. Release both keys. The illuminated ON•OFF key remains on. ! TIP: Throughout the programming of each key, be sure to keep the remote pointed at the IR sensor of the component you are currently programming the remote to control. ON•OFF ON•OFF (BLINK) STOP ON•OFF 8. Press and release the ON•OFF key repeatedly, waiting 4 seconds between each key press, until your component turns off. Each time you press the ON•OFF key, the illuminated ON•OFF key blinks, and the next code is sent. This process continues until all of the codes in the Code Lists have been searched. If your component turns off, you have found the correct code. (If it cycles through and the illuminated ON•OFF key blinks four times and turns off, all codes have been searched. The Manual Code Search method is exited.) 9. Once your component turns off, you have found the correct code. You must save the new code by pressing and releasing the STOP key. The illuminated ON•OFF key turns off. You must press the STOP key to save the code or the correct code will not be stored! Testing the Code for Maximum Functionality To confirm that the component key is programmed with the correct code for maximum functionality, it is necessary to test the component. If some of the features of your component do not work, different codes in the list can be tried until you find the code that allows the remote to control the majority of your component's functions. Different codes can provide different levels of functionality. Follow these steps to test for maximum functionality. 8