RCA TH1102 User Manual - TH1010 - Page 18
Additional Information - problems
UPC - 044319651485
View all RCA TH1102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Player's Menus Settings Press to enter the Settings menu and then press or to highlight an item. Press repeatedly to change settings. Language: to select the menu's language. Restore Defaults: to reset all menus to factory EN defaults. Backlight: • to adjust the time before the display light turns off (On/10s/20s/30s). • to adjust the color of the display light (Red/Blue/Green/Yellow/Cyan/Purple/White). System Info Press to show the amount of free space available and the firmware version. Power Save(Off, 1m, 2m, 5m and 10m): to adjust the duration for automatic shut down when the player is idle. Additional Information Tips and Troubleshooting • Problem: Player repeats same tracks or all tracks. - Repeat play is turned on. Refer to the Repeat section on page 16 on how to access and change the repeat setting. • Problem: Audio distorted at high volume. - Change the DSP mode to Flat. - Turn down the volume. • Problem: The player cannot be turned on. - Battery is empty. - Ensure the keys lock is not activated. - Reset the player by removing and re-installing of the battery. - If the player still cannot be turned on after resetting, perform a firmware upgrade to restore it. - Please go to http://www.rcaaudiovideo.com/faq for more details. • Problem: The audio tracks on my player keep skipping or popping. - You'll need to re-record the audio track - make sure you close all other applications on your PC when you record. - Try recording with Error Correction setting turned on. • Problem: Player turns itself off. - Your player turns itself off if you leave it in pause mode or navigation mode for the duration specified in Power Save setting. • Problem: Player does not respond to key presses. - If your player stops responding to key presses, you can reset it by removing and re-installing of the battery. Most of your settings will be preserved; only the settings that you have changed after your last power off will be lost. - Make sure the Hold switch is not on by sliding the "Power on/off ( )/Hold" switch to the left." 17