Radio Shack 15-2526 User Guide - Page 2

Package contents • RF Modulator • User's Guide Features • Equips your TV with A/V inputs • Converts any A/V signal into coaxial cable output 1 Connect the Modulator You need the following parts (not supplied) to connect your modulator to a video input source and your TV: • One A/V shielded cable. If your video source's audio output is stereo, use an A/V cable with three phono connectors at each end. If your video source's audio output is mono, use an A/V cable with two phono connectors at each end. • Two 75-ohm coaxial cables with F-type connectors. • One 75-ohm-to-300-ohm matching transformer (only if your TV does not have a VHF 75-ohm terminal). • One S-Video cable (only if your video source has an S-Video jack). 2