Radio Shack 49-105 User Guide - Page 1
Radio Shack 49-105 - Color Cameras With Switchbox Manual
UPC - 040293643102
View all Radio Shack 49-105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
49-105 2 PIR Color Cameras w/ Switchbox Thank you for purchasing your 2 PIR Color Cameras w/ Switchbox from RadioShack. The switchbox enables you to turn your TV into a monitor and the intercom function enables 2-way communication. For lowlight conditions, the compact cameras have built in nightvision and automatically switch to black and white. what's included preparing for installation • Carefully plan the camera position and cable route. • Select a dust-free location providing a clear view of the area you want to monitor, and that is not in a strong light source such as direct sunlight. • Do not install the camera in a location exposed to high humidity or rain. • Select a location for the camera that has an ambient temperature between -4°F (-20°C) and 122°F (50°C). • Plan the cable's route so it is not close to power or telephone lines, transformers, microwave ovens, or other electrical equipment that could interfere with the system. • If you plan to install the camera in a location with harsh conditions, consult with a professional installer and consider using a camera cover or housing (not included). • Before permanently mounting the camera, first setup and hold the camera in the desired location and check its performance on the monitor. • To illuminate the camera's viewing area beyond that of the nightvision, we recommend a small incandescent flood lamp. mounting your camera Use the wall mount bracket to mark the locations for the two mounting screw holes. (Optional) To run the video cable behind the mounting surface, drill a third hole at least 14 mm in diameter. To mount the camera, loosen the screw from the base of the camera's neck, and insert the camera onto the arm of the wall mount bracket. Secure the camera by tightening the screw. NOTE If mounting to a drywall, drill the drywall anchor holes just large enough to insert the anchors firmly, then follow the steps above. switchbox security camera (2) AC adapter wall mount bracket (2) screws (4) drywall anchors (4) video cable 59-foot cable (2) cable guide (20) user's guide limited 90-day warranty This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers. For complete warranty details and exclusions, check with your local RadioShack store. RadioShack Customer Relations 300 RadioShack Circle, Fort Worth, TX 76102 04/04 Always connect the adapter to the switchbox before you connect it to AC power. When you finish, disconnect the adapter from AC power before you disconnect it from the switchbox. Position the camera for the desired recording view. connecting your system (Optional) Connect the camera plug into the 59-foot cable socket then connect the 59-foot cable plug into the mini-DIN sockets CAM1 and CAM2 on the back of the switchbox. Connect the supplied video cable to the video sockets of your TV or monitor (matching yellow to yellow and white to white). Connect the adapter (supplied) into the DC 15V jack on the back of the switchbox. Then connect the other end of the adapter to a standard AC outlet. NOTE After the connection is completed, the green POWER indicator lights when the switchbox is powered on and it sounds two beeps. Important! You must use a Class 2 power source that supplies regulated 15V DC and delivers at least 500 mA. Its center tip must be set to positive and its plug must fit the switchbox's DC15V jack. Using an adapter that does not meet these specifications could damage the switchbox or the adapter. The correct orientation for this power unit is in a vertical or floor mount position. Please read this user's guide before installing, setting up and using your new product www.radioshack.com