Reebok Cyc12 English Manual - Page 6

Attach a Seat Handle 14 to the Seat Carriage 11

Page 6 highlights

5. Attach the Seat (12) to the Seat Carriage (11) with 5 four M6 x 16mm Hex Screws (29) and four M8 Flat Washers (18). 12 11 6. Attach a Seat Handle (14) to the Seat Carriage (11) 6 with two M8 x 19mm Button Bolts (43) and two M8 Nylon Locknuts (56). Attach the other Seat Handle (14) to the Seat Carriage (11) in the same way. 29 18 29 14 11 56 7. Attach the Backrest (13) to the Seat Carriage (11) 7 with four M6 x 38mm Hex Screws (78) and four M6 Washers (25). 11 25 14 43 13 25 78 8. Pull the seat knob and slide the Seat Carriage (11) 8 onto the Seat Rail (7). Refer to the inset drawing. Hold the Bumper Axle (82) inside of the Seat Rail (7). Attach the two Bumpers (84) to the ends of the Bumper Axle with two M6 x 16mm Screws (85) and two M6 Washers (25) as shown. Press the Seat Rail Endcap (23) into the end of the Seat Rail. 85 23 25 84 7 84 82 25 85 7 11 Knob 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

6
5.
Attach the Seat (12) to the Seat Carriage (11) with
four M6 x 16mm Hex Screws (29) and four M8 Flat
Washers (18).
6.
Attach a Seat Handle (14) to the Seat Carriage (11)
with two M8 x 19mm Button Bolts (43) and two M8
Nylon Locknuts (56).
Attach the other Seat Handle (14) to the Seat
Carriage (11) in the same way.
7.
Attach the Backrest (13) to the Seat Carriage (11)
with four M6 x 38mm Hex Screws (78) and four M6
Washers (25).
43
14
14
56
11
13
25
11
25
78
5
6
7
8.
Pull the seat knob and slide the Seat Carriage (11)
onto the Seat Rail (7).
Refer to the inset drawing. Hold the Bumper Axle
(82) inside of the Seat Rail (7). Attach the two
Bumpers (84) to the ends of the Bumper Axle with
two M6 x 16mm Screws (85) and two M6 Washers
(25) as shown. Press the Seat Rail Endcap (23) into
the end of the Seat Rail.
11
Knob
7
8
12
11
29
29
18
23
82
85
85
84
84
25
25
7