Reebok Rb450 Bike User Manual - Page 5

Wire Harness 16 to the Lower Wire Harness 77.

Get Reebok Rb450 Bike PDF manuals and user guides View all Reebok Rb450 Bike manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

1. Identify the Front Stabilizer (2), which has Wheels (75) attached to one side. Attach the Front Stabilizer 1 to the front of the Frame (1) with two M8 x 25mm Button Screws (27) and two M8 Split Washers (70). 75 2 2. Attach the Rear Stabilizer (3) to the rear of the 2 Frame (1) with two M8 x 25mm Button Screws (27) and two M8 Split Washers (70). 1 70 27 27 70 1 3 27 70 3. While a second person holds the Handlebar Post (6) near the Frame (1) as shown, connect the Upper 3 Wire Harness (16) to the Lower Wire Harness (77). Carefully slide the Handlebar Post (6) onto the Frame (1); be careful to avoid pinching the Wire Harnesses (16, 77). Attach the Handlebar Post to the Frame with four M8 x 25mm Button Screws (27) and four M8 Split Washers (70). 4. Insert the Bookrack (55) into the slots in the Console 4 (9). Attach the Bookrack to the Console with two M4 x 25mm Screws (72). Be careful not to pinch the wires in the Console. 70 27 70 16 77 1 6 70 27 70 55 72 9 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
5
2
75
70
1
27
1.
Identify the Front Stabilizer (2), which has Wheels
(75) attached to one side. Attach the Front Stabilizer
to the front of the Frame (1) with two M8 x 25mm
Button Screws (27) and two M8 Split Washers (70).
2.
Attach the Rear Stabilizer (3) to the rear of the
Frame (1) with two M8 x 25mm Button Screws (27)
and two M8 Split Washers (70).
3.
While a second person holds the Handlebar Post (6)
near the Frame (1) as shown, connect the Upper
Wire Harness (16) to the Lower Wire Harness (77).
Carefully slide the Handlebar Post (6) onto the
Frame (1);
be careful to avoid pinching the Wire
Harnesses (16, 77).
Attach the Handlebar Post to
the Frame with four M8 x 25mm Button Screws (27)
and four M8 Split Washers (70).
2
3
3
6
27
27
70
70
1
16
77
70
70
4.
Insert the Bookrack (55) into the slots in the Console
(9). Attach the Bookrack to the Console with two M4
x 25mm Screws (72).
Be careful not to pinch the
wires in the Console.
4
55
72
9
27
27
70
70
1
1