Reebok Rb450 Bike User Manual - Page 6
Attach the Water Bottle Holder 69 to the Handlebar
View all Reebok Rb450 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
5. Connect the Pulse Wire (71) to the wire extending from the Console (9). Next, connect the Upper Wire 5 Harness (16) to the wire harness on the Console. Insert all wires into the Handlebar Post (6). Attach the Console (9) to the Handlebar Post (6) with four M4 x 16mm Screws (21). Be careful to avoid pinching the wires. 9 Console 21 Wires 71 16 6 6. Attach the Water Bottle Holder (69) to the Handlebar 6 Post (6) with two M4 x 16mm Screws (21). Note: The water bottle holder is designed to be used with your own water bottle. 69 6 21 7. Attach the Seat (12) to the Seat Carriage (11) with 7 four 1/4" x 16mm Hex Screws (29) and four M8 Flat Washers (18). 12 8. Attach a Seat Handle (14) to the Seat Carriage (11) 8 with two M8 x 19mm Button Bolts (43) and two M8 Nylon Locknuts (56). Attach the other Seat Handle (14) to the Seat Carriage (11) in the same way. 11 18 29 14 11 56 29 14 43 6