Rheem Versa Heaters Operating Instructions - Page 23
Fig. 29: Millivolt Burner Tray Assembly, Fig. 30: DSI Burner Tray Assembly
View all Rheem Versa Heaters manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
4. Disconnect gas line from gas valve. 5. Remove (2) screws that mount burner tray to unit, and (2) screws that secure gas valve to jacket. 8. Remove (1) screw that mounts ground wire to burner tray. 9. Slide out burner tray. 6. Disconnect wires that terminate at gas valve. 10. Reverse above procedure to reinstall. 7. Disconnect hi-tension wire from igniter. Rear Hold Down Bracket Burner Pilot Shield Millivolt Pilot Assembly (under Pilot Shield) Millivolt Gas Valve (Invensys shown) Manifold Orifice Igniter Orifice Pilot Lighter Tube Orifice Placement Bracket Pilot Bracket Burner Tray Panel Fig. 29: Millivolt Burner Tray Assembly Rear Hold Down Bracket Burner DSI Gas Valve (Honeywell shown) Manifold Orifice Placement Bracket Burner Tray Panel Fig. 30: DSI Burner Tray Assembly 23