Ricoh 3045 User Instructions - Page 25
Check
View all Ricoh 3045 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
A Press [Transmission Mode]. B Press [Polling RX]. C Depending on which method you are using, select one of the following procedures: Polling Reception ID Override Polling Reception A Select [ID Override Polling Recep- tion]. B Specify a 4-digit ID using the 1 number keys and [A], [B], [C], [D], [E], and [F], and then press [OK]. Default ID/Free Polling Reception A Check that [Default ID / Free Polling RX] is selected, and then press [OK]. Note ❒ To cancel Polling Reception, press [Cancel]. The display returns to that of step B. "ID Override: " and the entered Polling ID are shown above the highlighted [Polling RX]. Note ❒ A Polling ID may be any four numbers (0 to 9) and characters (A to F), except 0000 and FFFF. ❒ If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing [OK], and then try again. ❒ To cancel Polling Reception, press [Cancel]. The display returns to that of step B. D Press [OK]. The standby display appears. E Specify the destination, and then press the {Start} key. 15