Ricoh 9100DN Operating Instructions

Ricoh 9100DN - Aficio SP B/W Laser Printer Manual

Get Ricoh 9100DN - Aficio SP B/W Laser Printer PDF manuals and user guides
UPC - 026649026164
View all Ricoh 9100DN manuals
Add to My Manuals
Save this manual to your list of manuals

Ricoh 9100DN manual content summary:

  • Ricoh 9100DN | Operating Instructions - Page 1
    Instructions Hardware Guide 1 Guide to the Printer 2 Setting Up 3 Connecting the Printer 4 Configuration 5 Installing the Printer Driver 6 Paper and Other Media 7 Replacing Consumables 8 Cleaning and Adjusting the Printer 9 Troubleshooting 10 Removing Misfed Paper 11 Appendix Read this manual
  • Ricoh 9100DN | Operating Instructions - Page 2
    of Apple Computer, Inc., registered in the U.S. and other countries. IPS-PRINT Printer Language Emulation Copyright© 1999-2000 Oak Technology, Inc., All rights reserved. NetWare is 4.0 Microsoft® Windows NT® Server 4.0 Some illustrations in this manual might be slightly different from the machine.
  • Ricoh 9100DN | Operating Instructions - Page 3
    TABLE OF CONTENTS Positions of WARNING and CAUTION labels 4 Manuals for This Printer...6 How to Read This Manual...7 Symbols...7 Names of Major Options...7 Description for the Specified Model...9 1. Guide to the Printer Exterior: Front View...11 Exterior: Rear View...12 Inside...13 Control Panel...
  • Ricoh 9100DN | Operating Instructions - Page 4
    ) Configuration 47 Setting SSID...49 Setting a WEP key...50 5. Installing the Printer Driver Quick Install...53 Install the Operating Instructions...55 6. Paper and Other Media Paper and Other Media Supported by This Printer 57 Paper Recommendations...59 Loading Paper...59 Storing Paper...59 Types
  • Ricoh 9100DN | Operating Instructions - Page 5
    Checking the port connection...107 Other Printing Problems...108 Additional Troubleshooting...113 Pausing Print When Using Finisher...115 Removing 11. Appendix Moving and Transporting the Printer...147 Disposal...148 Consumables...149 Toner bottles...149 Specification...150 Mainframe...150 Options
  • Ricoh 9100DN | Operating Instructions - Page 6
    Positions of WARNING and CAUTION labels This machine has labels for WARNING and CAUTION at the positions shown below. For safety, please follow the instructions and handle the machine as indicated. AST006S 4
  • Ricoh 9100DN | Operating Instructions - Page 7
    AST007S 1. The inside of this printer becomes very hot. Do not touch parts with this label (indicating a hot surface). Touching these parts will result in burns. 2. Do not touch this section
  • Ricoh 9100DN | Operating Instructions - Page 8
    Manuals for This Printer For particular functions, see the relevant parts of the manual. Safety Information Provides information on safe usage of this machine. To avoid injury and prevent damage to the machine, be sure to read this. Hardware Guide (This manual) Contains information about paper and
  • Ricoh 9100DN | Operating Instructions - Page 9
    following set of symbols is used in this manual. This symbol indicates a potentially hazardous situation that might result in death or serious injury when you misuse the machine without following the instructions under this symbol. Be sure to read the instructions, all of which are described in the
  • Ricoh 9100DN | Operating Instructions - Page 10
    • [Booklet Finisher] Finisher SR4000 8
  • Ricoh 9100DN | Operating Instructions - Page 11
    Description for the Specified Model In this manual, the following items explain about the printer for the specified models: This explains about the 220 - 240 V model printer. Read if you purchase this model. This explains about the 120 V model printer. Read if you purchase this model. • You can
  • Ricoh 9100DN | Operating Instructions - Page 12
    10
  • Ricoh 9100DN | Operating Instructions - Page 13
    1. Guide to the Printer Exterior: Front View 1 AST001S 1. Call- light Notifies you of errors during printing, such as paper jam and out of paper. 2. External Tray (optional) Printed paper is delivered here. 3. Power Switch Switches the power of the printer to On or Stand by mode. 4. Control Panel
  • Ricoh 9100DN | Operating Instructions - Page 14
    1. Guide to the Printer Exterior: Rear View 1 AST002S 1. Ethernet Port Use a network interface cable to connect the printer to the network. 2. USB port Use a USB cable to connect the printer to the host computer. 3. Ventilation Prevents overheating. Place no objects against or near these holes. 4.
  • Ricoh 9100DN | Operating Instructions - Page 15
    Fusing Unit" message appears on the panel display, replace the fusing unit. For details about replacing this unit, contact your sales or service representative. 2. Toner When "Add toner" message appears on the display panel, replace a toner bottle. 3. Duplex Unit Prints on both sides of paper. 13
  • Ricoh 9100DN | Operating Instructions - Page 16
    . Pressing this key during any settings returns the machine to the default screen. 4. [Form Feed] key When the printer is offline, press this key to print all data left in the printer's input buffer. You can use this key to force the printer to print data received in the online status when the paper
  • Ricoh 9100DN | Operating Instructions - Page 17
    Control Panel Press this key to return to the previous condition on the display. 10. [ Enter] key Press this key to confirm or apply settings to proceed to the subsequent steps. 11. [ ] [ ] keys 1 Press these keys to increase or decrease displayed values when making settings. Keep pressed to
  • Ricoh 9100DN | Operating Instructions - Page 18
    1. Guide to the Printer Options This section introduces the names and functions of main optional parts. 1 External Options This section provides explanations about external options. AST005S 1. Output Jogger Attached
  • Ricoh 9100DN | Operating Instructions - Page 19
    paper in tray 1 using this unit. 1 10. LCT Connection Unit Connect the LCT to the printer. Internal Options This section provides explanations about internal options. • IEEE 1284 Interface Board Connects to the IEEE you want to install the unit, contact your sales or service representative. 17
  • Ricoh 9100DN | Operating Instructions - Page 20
    1. Guide to the Printer 1 18
  • Ricoh 9100DN | Operating Instructions - Page 21
    2. Setting Up Where to Put the Printer • Confirm the wall outlet is near the machine and freely accessible, so that in the event of emergency, 2 it can be unplugged easily. • Only connect the machine to the power source described in the manual. • Avoid multi-wiring. • Do not damage, break or
  • Ricoh 9100DN | Operating Instructions - Page 22
    2. Setting Up A: 10 cm (4 inches) or more B: 5 cm (2 inches) or more C: 4 cm (1.6 inches) or more D: 70 cm (27.6 inches) or more • Permissible and recommended temperature and humidity ranges are as follows: 2 AST101S AST102S • The machine must be level within 5 mm, 0.2" from both front to rear and
  • Ricoh 9100DN | Operating Instructions - Page 23
    • frequent strong vibration • EMF from nearby electronic equipment Where to Put the Printer 2 21
  • Ricoh 9100DN | Operating Instructions - Page 24
    high standards of quality and functionality, and we recommend that you use only the expendable supplies available at an authorized dealer. • Do not open toner cartridges forcefully. Toner can spill, dirtying your clothes or hands, and possibly resulting in accidental ingestion. • Do not expose the
  • Ricoh 9100DN | Operating Instructions - Page 25
    2. Take the new toner bottle from the box. Installing the Toner bottle 2 AST103S 3. Hold the bottle horizontally, and then shake it five or six times without removing the outer cap. 4. Remove the outer cap. AST104S AST105S 5. Pull the lever out toward you, until it is at 90°. 23
  • Ricoh 9100DN | Operating Instructions - Page 26
    of quality and functionality. When pur- chasing expendable supplies, we recommend using only those provided by an authorized dealer. • The toner bottles supplied with the printer allow you to print about 43,000 pages. These numbers were obtained from printing A4 5% charts, but the actual number of
  • Ricoh 9100DN | Operating Instructions - Page 27
    , if there is problem, contact the store where they were purchased. • If the toner bottle does not click into position, pull it slightly back toward you, rotate it 10-20° to the right, and then re-insert it. • Do not insert and remove the toner bottle more than necessary, as toner spills may result
  • Ricoh 9100DN | Operating Instructions - Page 28
    manufacturer to accommodate the following types of paper: Default settings Tray 1: A4 Tray 1: 11 × . While the paper is moving, a message instructing you to wait appears. Do not pull out other then A4 or 11 × 81/2 paper, contact your service representative. • Do not stack paper over the limit mark.
  • Ricoh 9100DN | Operating Instructions - Page 29
    • Left half of the tray pulled out ANS052S Loading Paper 2 ANS053S 3. Carefully push the paper tray fully in. • You can load paper even while printing from Tray 1. You can pull out the left half of the tray while printing. Loading Paper into Tray 2 and 3 The following explains the procedure for
  • Ricoh 9100DN | Operating Instructions - Page 30
    2. Setting Up 2 ANS054S 2. Square the paper, and then load it print side down. ANS055S 3. Carefully push the paper tray fully in. • The tray can hold up to 550 sheets. 28
  • Ricoh 9100DN | Operating Instructions - Page 31
    Turning the Power On Turning the Power On • Plug and unplug the power cable with dry hands, or an electric shock could occur. Power Switch • Power Switch (front left) 2 Setting this switch to Stand by makes the power lamp on the control panel unlit. The machine is then in stand by mode. •
  • Ricoh 9100DN | Operating Instructions - Page 32
    2. Setting Up • This machine automatically enters the Energy Saver mode if you do not use it for a certain period. 2 30
  • Ricoh 9100DN | Operating Instructions - Page 33
    Selecting the Display Language Selecting the Display Language The following explains the procedure for selecting a language on the display. A message about selecting the language will appear on the display. If you want to use the display in English, the following procedures are unnecessary. 1.
  • Ricoh 9100DN | Operating Instructions - Page 34
    2. Setting Up 5. Press the [ Enter] key. Wait for two seconds. The [Menu] screen appears. 6. Press the [Online] key. 2 The initial screen appears. AST010S • The default setting is English. 32
  • Ricoh 9100DN | Operating Instructions - Page 35
    Test Printing The following explains the procedure for test printing of the configuration page. 1. Press the [Menu] key. Test Printing 2 AST008S The menu appears on the display. 2. Press the [ ] or [ ] key to display [List/Test print], and then press the [ Enter] key. The menu for selecting the
  • Ricoh 9100DN | Operating Instructions - Page 36
    checks printer performance only; it does not test the connection to the computer. • If printing is not normal, check and follow contents of an error message on the display, and retry a test print. • For details about the configuration page, see "Interpreting the Configuration Page", Software Guide
  • Ricoh 9100DN | Operating Instructions - Page 37
    and other network devices before connecting the 10BASE-T or 100BASE-TX cable to the printer's Ethernet port. Alternatively, the optional gigabit ethernet board, which supports 1000BASE-T, is available. • Use shielded Ethernet cable. Unshielded cables create electromagnetic interference that could
  • Ricoh 9100DN | Operating Instructions - Page 38
    available when the gigabit ethernet board is attached to the printer. • For details about network environment settings, see Software Guide. • For details about attaching the gigabit ethernet board, contact your sales or service representative. Reading the LED Lamps 3 For standard ethernet port
  • Ricoh 9100DN | Operating Instructions - Page 39
    printer. 2. Connect the opposite end's flat connector to devices such as your computer's USB interface, or a USB hub. • For details about settings for USB connection printing, see Software Guide. • For details about attaching the gigabit ethernet board, contact your sales or service representative
  • Ricoh 9100DN | Operating Instructions - Page 40
    cable is not supplied with the printer. • The printer's parallel connection is a standard bidirectional port: DC 5 V (max.) 1. Turn off the printer and computer. 2. Connect the cable to the interface socket of printing, see Software Guide. • For details about attaching the IEEE 1284 interface board,
  • Ricoh 9100DN | Operating Instructions - Page 41
    environment. The following table shows the control panel settings and their default values. These items appear in the [Host Interface] menu. Setting AppleTalk: Active Ethernet Speed Auto Select LAN Type Ethernet • Configure the printer for the network using the control panel. • If DHCP is in
  • Ricoh 9100DN | Operating Instructions - Page 42
    4. Configuration AST008S The menu appears on the display. 4 2. Press the [ ] or [ ] key to select [Host Interface], and then press the [ Enter] key. 3. Press the [ ] or [ ] key to select [Network Setup], and then press the [ Enter] key. 4. Press the [ ] or [ ] key to select [Active Protocol],
  • Ricoh 9100DN | Operating Instructions - Page 43
    • For details about printing the configuration page, see p.33 "Test Printing". Using DHCP - Detecting the Network Address Automatically • When you use this printer in DHCP environment, select [DHCP] following this procedure. • When [DHCP] is selected, you cannot make settings for the IP address and
  • Ricoh 9100DN | Operating Instructions - Page 44
    the [ Enter] key. 6. Press the [ ] or [ ] key to select [On] or [Off], and then press the [ Enter] key. The address will be detected by the printer. The default setting is [On]. 7. Press the [Menu] key to return to the initial screen. 8. Print a configuration page to confirm the settings made. 42
  • Ricoh 9100DN | Operating Instructions - Page 45
    below if necessary. • Auto Select • Ethernet II • Ethernet 802.2 • Ethernet 802.3 4 • Ethernet SNAP • Usually, use the default setting ("Auto Select"). When you first select "Auto Select", the frame type detected by the printer is adopted. If your network can use more than two frame types, the
  • Ricoh 9100DN | Operating Instructions - Page 46
    Set the access speed for Ethernet. Confirm your network environment, and then select a speed that matches it using the following table. Printer Router/HUB [10Mbps Half [10Mbps Full [100Mbps D.] D.] Half D.] 10 Mbps half duplex - - 10 Mbps full duplex - - 100 Mbps half duplex - - 100
  • Ricoh 9100DN | Operating Instructions - Page 47
    Ethernet Configuration Printer Router/HUB [10Mbps Half [10Mbps Full [100Mbps D.] D.] Half D.] auto-negotia- tion (auto se- - lection) [100Mbps Full [Auto Select] D.] - • Connection cannot be established if the Ethernet
  • Ricoh 9100DN | Operating Instructions - Page 48
    4. Configuration 5. Press the [ ] or [ ] key to select the ethernet speed, and then press the [ Enter] key. 6. Press the [Menu] key to return to the initial screen. 7. Print a configuration page to confirm the settings made. • If Ethernet and wireless LAN (IEEE 802.11b) are both connected, select
  • Ricoh 9100DN | Operating Instructions - Page 49
    IEEE 802.11b (Wireless LAN) Configuration IEEE 802.11b (Wireless LAN) Configuration Configure the printer to use IEEE 802.11b (Wireless LAN). The following table shows the control panel settings and their default values. These items appear in the [Host Interface] menu. Comm.Mode Setting Name
  • Ricoh 9100DN | Operating Instructions - Page 50
    transmission mode of IEEE 802.11b, and then press the [ Enter] key. • The factory default is [802.11 Ad hoc]. • To use an IEEE 802.11b card for which the SSID Web browser, and "Configuring the Network Interface Board Using Web Browser", Software Guide. 6. If [802.11 Ad hoc] or [Ad hoc] is selected
  • Ricoh 9100DN | Operating Instructions - Page 51
    IEEE 802.11b (Wireless LAN) Configuration The factory default is [Auto]. If you need to change the , see the Web Image Monitor Help, and "Configuring the Network Interface Board Using Web Browser" Software Guide. • WEP key can also be set using a Web browser. For details, see Web Image Monitor
  • Ricoh 9100DN | Operating Instructions - Page 52
    4. Configuration Setting a WEP key In the case of using a WEP key on a network, activate the WEP setting to be used for communication along with WEP. Consult your network administrator for the WEP key to use. 1. In the [IEEE 802.11b] menu, select [Security Method] using the [ ] or [ ] key, and then
  • Ricoh 9100DN | Operating Instructions - Page 53
    IEEE 802.11b (Wireless LAN) Configuration • WEP key can also be set using a Web browser. For details, see Web Image Monitor Help. • For details about printing the configuration page, see p.33 "Test Printing". 4 51
  • Ricoh 9100DN | Operating Instructions - Page 54
    4. Configuration 4 52
  • Ricoh 9100DN | Operating Instructions - Page 55
    driver under Windows 2000/XP Professional, and Windows Server 2003, you must have an account that has Manage Printers permission. Log on as an Administrator. • Quick Install is not available when using this printer under USB connection. If you connect using USB, see Software Guide default
  • Ricoh 9100DN | Operating Instructions - Page 56
    Printer Driver 7. Click [Install]. The printer driver then reinstall other softwares or printer drivers. • Auto Run may not work under certain operating system settings. If this is the case, launch "Setup.exe" on the CD-ROM root directory. • Select a printer the printer and
  • Ricoh 9100DN | Operating Instructions - Page 57
    then launch "Setup.exe" to start the installation. • To uninstall the Operating Instructions Manual, select Programs in the Start menu, select your printer driver, and then click Uninstall. You can uninstall each Manual Guide separately. • If you are using an incompatible Web browser and the simpler
  • Ricoh 9100DN | Operating Instructions - Page 58
    5. Installing the Printer Driver 5 56
  • Ricoh 9100DN | Operating Instructions - Page 59
    6. Paper and Other Media Paper and Other Media Supported by This Printer This section describes the paper size, feed direction, and the maximum amount of paper that can be loaded into each paper tray in this printer. Symbols In this manual (Feed direction) (Feed direction) On the display A4 (210
  • Ricoh 9100DN | Operating Instructions - Page 60
    approximately 139.7 - 297 mm (5.50 - 11.69 inches) in width, and 139.7 - 432 mm (5.50 - 17.00 inches) in length. The supported size may differ depending on the printer language you use. Set as a custom size setting using the control panel. Input Paper Sizes Large Capacity Tray (LCT) (option) B4JIS
  • Ricoh 9100DN | Operating Instructions - Page 61
    For details about recommended paper, contact your sales or service representative. 6 Storing Paper Paper should always be stored the package in which the paper came. Types of Paper and Other Media Plain Paper Paper thickness Printer setup 60 - 105 g/m2 (16 - 28 lb.) Press the [Menu] key, select
  • Ricoh 9100DN | Operating Instructions - Page 62
    Paper Input], [Paper Type], the target paper tray, and then [Thick Paper]. • The paper size settings made using the control panel have priority over the printer driver settings. Select [Thick] in the [Paper Type:] list. Any input tray can be used. Make sure paper is not stacked higher than the upper
  • Ricoh 9100DN | Operating Instructions - Page 63
    types of paper between 128 - 216 g/m2 in weight that are not supported. Paper Not Supported by this Printer Avoid using the following paper as they are not supported by this printer. • Paper meant for an ink-jet printer • Bent, folded, or creased paper • Curled or twisted paper • Torn paper
  • Ricoh 9100DN | Operating Instructions - Page 64
    6. Paper and Other Media 1. Print area 2. Feed direction 6 3. Approx. 4 mm (0.16 inches) 4. Approx. 2 mm (0.08 inches) • The print area may vary depending on the paper size, printer language and printer driver settings. 62
  • Ricoh 9100DN | Operating Instructions - Page 65
    manufacturer to accommodate the following types of paper: Default settings Tray 1: A4 Tray 1: 11 × right. While the paper is moving, a message instructing you to wait appears. Do not pull out to load paper other than A4 paper, contact your service representative. • Do not stack paper over the limit
  • Ricoh 9100DN | Operating Instructions - Page 66
    6. Paper and Other Media Whole tray pulled out Left half of the tray pulled out ANS052S 6 ANS053S 3. Carefully push the paper tray fully in. • You can load paper even while printing from Tray 1. You can pull out the left half of the tray while printing. Specifying the Paper Type When you load
  • Ricoh 9100DN | Operating Instructions - Page 67
    ] key. The initial screen appears. • Paper type setting can also be set using the printer driver. • The paper size settings made using the control panel have priority over the printer driver settings. • When you do not wish to use the printer driver, make the setting using the control panel. 65
  • Ricoh 9100DN | Operating Instructions - Page 68
    the next setting is made. After printing on thick paper, reset it to the original setting for the next user. • For printer driver settings, see the printer driver Help. Loading Paper into Tray 2 and 3 The following explains the procedure for loading paper into Tray 2 and 3. • Various sizes of paper
  • Ricoh 9100DN | Operating Instructions - Page 69
    Loading Paper Changing the Paper Size in Tray 2 and 3 The following explains the procedure for changing a paper size in Tray2 and 3. • If a paper tray is pushed vigorously when putting it back into place, the position of the tray's side fence may slip out of place. • Check the top of the paper is
  • Ricoh 9100DN | Operating Instructions - Page 70
    6. Paper and Other Media ANS024S 5. Slide the end fence until it is aligned with the paper size you want to load. 6 ANS025S 6. Square the paper and load it print side up. Re-lock the side fence again. ANS026S 7. Carefully slide the paper tray fully in. 8. Check the size on the display. • If there is
  • Ricoh 9100DN | Operating Instructions - Page 71
    Loading Paper Specifying Custom Size Paper When printing on custom size paper, specify the paper size using the control panel or printer driver. The following is the range of paper sizes that can be loaded in each type of the paper trays: • Vertical: 139.7 - 297.0 mm (5.5 - 11.7 inches) •
  • Ricoh 9100DN | Operating Instructions - Page 72
    settings made using the control panel have priority over the printer driver settings. If the Paper Tray is set to Tray #, the paper size settings made using the control panel have priority over the printer driver settings. Specifying the Paper Type When you load translucent paper or
  • Ricoh 9100DN | Operating Instructions - Page 73
    1. Select the paper tray where the tab stock is set. Loading Paper AST014S 2. Set tab stock so that it will be fed from the side without the tab first. 3. Adjust the back fence position so that the tab sheet fence will fit the tab stock. 6 4. Press the [Menu] key. AST015S AST008S The menu
  • Ricoh 9100DN | Operating Instructions - Page 74
    6. Paper and Other Media 6. Press the [ ] or [ ] key to display [Paper Input], and then press the [ Enter] key. 7. Press the [ ] or [ ] key to display [Tray 2] or [Tray 3], and then press the [ Enter] key. 8. Press the [ ] or [ ] key to display [Tab Stock] using [ ] or [ ], and then press the [
  • Ricoh 9100DN | Operating Instructions - Page 75
    Loading Paper ANQ009S 3. Carefully slide the paper tray fully in. • The tray can hold up to 550 sheets. Loading Paper into the Large Capacity Tray (LCT) The following procedure explains loading paper into the large capacity tray (LCT). 6 • Align the paper neatly and press its edge to the right
  • Ricoh 9100DN | Operating Instructions - Page 76
    6. Paper and Other Media AST110S 3. Press the [Down] key. The key blinks while the bottom plate is moving down. 6 AST111S 4. Load paper by repeating steps 2 and 3. The tray can hold up to 4,000 sheets. 5. Close the top cover of the large capacity tray (LCT). Specifying the Paper Type When you load
  • Ricoh 9100DN | Operating Instructions - Page 77
    • Do not stack paper higher than the limit mark inside the tray. 1. Load the paper. Loading Paper AST112S 2. Adjust the paper guides to the paper size. 6 AST113S • Straighten curled or warped paper before loading. • Fan the paper before loading. 75
  • Ricoh 9100DN | Operating Instructions - Page 78
    6. Paper and Other Media 6 76
  • Ricoh 9100DN | Operating Instructions - Page 79
    to On. If it is set to standby, the settings are cancelled and printing cannot resume. Also, toner refill may not be recognized, and the "Add Toner" display may appear again. • Be sure to refill the toner only when instruction to do so appears on the display. • Do not remove the inner cap. • Avoid
  • Ricoh 9100DN | Operating Instructions - Page 80
    Consumables 1. Open the front cover of the machine. AST016S 2. Pull out the lever under the toner bottle toward you, until it is at 90°. 7 AST163S 3. Raise the green lever, and then gently pull out the toner bottle. AST164S 4. Hold the new bottle horizontally, and then shake it five or six times
  • Ricoh 9100DN | Operating Instructions - Page 81
    Replacing the Toner bottle 5. Remove the outer cap. AST104S AST105S 7 6. Place the toner bottle in position, and then push it in until the green lever clicks. AST107S 7. Return the lever under the toner bottle to its original position. 79
  • Ricoh 9100DN | Operating Instructions - Page 82
    7. Replacing Consumables AST108S 8. Close the front cover of the machine. 7 80
  • Ricoh 9100DN | Operating Instructions - Page 83
    Adding Staples Adding Staples • Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple unit. You can trap your fingers if you do not. When "Add staples" appears on the panel display, the staples are almost empty. Follow these steps to replace the
  • Ricoh 9100DN | Operating Instructions - Page 84
    7. Replacing Consumables 4. Raise the cover. AST025S 7 AST116S 5. Insert the new refill, and then lower the cover until it clicks. AST117S 82
  • Ricoh 9100DN | Operating Instructions - Page 85
    Adding Staples 6. Pull out the ribbon. AST118S AST119S 7 7. Reinstall the cartridge, pushing it into the unit until it clicks. AST060S 8. Reinstall the staple unit. 9. Close the finisher's front cover. Finisher SR4000 The following procedure explains how to add staples to the Finisher SR4000.
  • Ricoh 9100DN | Operating Instructions - Page 86
    7. Replacing Consumables 2. Pull out the staple unit. Pull out the cartridge gently. AST038S 3. Hold both sides of the cartridge, and then pull up the upper unit of it. 7 AST049S 4. Take out the empty refill in the arrow direction. AST050S 5. Align the arrows on the new refill and the cartridge, and
  • Ricoh 9100DN | Operating Instructions - Page 87
    Adding Staples AST051S 6. Gently push down the upper unit into the cartridge. AST052S 7 7. Pull out the ribbon. AST053S 8. Hold the green lever while pushing in the cartridge until it clicks. 85
  • Ricoh 9100DN | Operating Instructions - Page 88
    7. Replacing Consumables AST042S Return the staple unit to its original position. 9. Close the finisher's front cover. • If you cannot pull out the upper unit, there are staples remaining inside the cartridge. Use all the staples, do not add more. Finisher SR4000 (Saddle Stitch) 7 The following
  • Ricoh 9100DN | Operating Instructions - Page 89
    Adding Staples AST044S 4. Hold both sides of the cartridge, and then pull up the upper unit of it. AST054S 7 5. Take out the empty refill in the arrow direction. AST055S 6. Align the arrows on the new refill and the cartridge, and then push in the refill until it clicks. 87
  • Ricoh 9100DN | Operating Instructions - Page 90
    7. Replacing Consumables AST056S 7. Gently push down the upper unit into the cartridge. 7 AST057S 8. Pull out the ribbon. AST058S 9. Hold the green lever while pushing in the cartridge until it clicks. Return the lever S2 to its original position. 88
  • Ricoh 9100DN | Operating Instructions - Page 91
    Adding Staples AST048S Return the staple unit to its original position. 10. Close the finisher's front cover. • If you cannot pull out the upper unit, there are staples remaining inside the cartridge. Use all the staples, do not add more. 7 89
  • Ricoh 9100DN | Operating Instructions - Page 92
    7. Replacing Consumables 7 90
  • Ricoh 9100DN | Operating Instructions - Page 93
    and Adjusting the Printer Cautions to Take When Cleaning • Do not remove any covers or screws other than those specified in this manual. Some parts the machine needs to be checked, adjusted, or repaired, contact your service representative. • Do not take apart or attempt any modifications to this
  • Ricoh 9100DN | Operating Instructions - Page 94
    8. Cleaning and Adjusting the Printer Adjusting Tray Registration You can adjust the registration of each tray. Vertical adjustment is used for all trays. Normally, you need not update the registration.
  • Ricoh 9100DN | Operating Instructions - Page 95
    Adjusting Tray Registration 6. Press the [Escape] key. 7. Press the [ ] or [ ] key to display [Adjustment], and then press the [ Enter] key. 8. Press the [ ] or [ ] key to display the adjusting value, and then press the [ Enter] key. 8 9. Press the [ ] or [ ] key to set the registration value (mm).
  • Ricoh 9100DN | Operating Instructions - Page 96
    8. Cleaning and Adjusting the Printer AAL708S (1): Print Area (2): Feed Direction Pressing the [ ] or [ ] key makes the value increase or decrease by 1.0 mm steps. 10. Press the [ Enter] key. 8 11. Press
  • Ricoh 9100DN | Operating Instructions - Page 97
    9. Troubleshooting Error & Status Messages on the Display Panel This section describes the main messages that appear on the panel display. If a message that is not described here, follow its instructions. Status Messages Ready This is the default ready message. The machine is ready for use. No
  • Ricoh 9100DN | Operating Instructions - Page 98
    9. Troubleshooting The printer is out of the staple. • Add staples, cancel staples mode or Form Feed], or cancel the job. Add Toner 9 The printer is out of toner. • Replace the toner bottle. • See p.81 . Call Service: EC Power Off On/Call Service if error reoccurs A communication error was
  • Ricoh 9100DN | Operating Instructions - Page 99
    printing the job again. Change Setting Tray #/Paper Size: Paper Type The printer detected that the actual paper type was not the same as the paper See p.124 "Removing Punch Waste". Error: Tray # Form Feed There is a problem with the tray. • Turn the power switch to Standby, and then to On.
  • Ricoh 9100DN | Operating Instructions - Page 100
    9. Troubleshooting The entered number of characters for the WEP Key (ASCII entry) is then to On the power switch. If the error appears again, call your sales / service representative. Hardware Problem Ethernet The printer detected an ethernet error. • Turn the power switch to Stand by, and then to
  • Ricoh 9100DN | Operating Instructions - Page 101
    interface cable being used. • If the message appears again, call your service provider. Hardware Problem Printer font The printer identified a printer font file error. • It is necessary to replace the print module. Hardware Problem Staple Unit The Staple Unit is not functioning. • Call your
  • Ricoh 9100DN | Operating Instructions - Page 102
    9. Troubleshooting • Prepare a new toner bottle. • You can print until [Add Toner] appears. problem. • Turn the power switch to Stand by, and then to On. If the message appears again, call your sales / service representative. Report the error code that appears. RC Gate connection error The printer
  • Ricoh 9100DN | Operating Instructions - Page 103
    ) • Open the Finisher cover and remove paper. • See p.137 "Remove Misfeed R: Finisher". Replace Charger Unit It is time to replace the Charger. • Call your sales / service representative as soon as possible. Replace Cleaning web soon Cleaning web is almost worn out. • Call your sales
  • Ricoh 9100DN | Operating Instructions - Page 104
    It is time to replace the waste toner. • Call your sales / service representative. Reset Tray # correctly The indicated paper input tray is not set correctly, or is not set. • Set the indicated paper input tray correctly. Reset Tray # or Form Feed There is a problem with the tray. 9 • Load the
  • Ricoh 9100DN | Operating Instructions - Page 105
    wireless LAN. • See p.47 "IEEE 802.11b (Wireless LAN) Configuration". Supply order failed Call for supply order has failed. • Call your sales / service representative. Suspend/Resume was pressed The Suspend/Resume button on the finisher was pressed. • Press the button again to resume printing. Waste
  • Ricoh 9100DN | Operating Instructions - Page 106
    Troubleshooting When Call-light Is Lit or Blinking • Do not push or pull the call-light when installed to the printer. Doing so may result in damage or malfunction of the call-light or the printer appropriate action. Warning (Example) • Toner level low • Waste toner bottle is almost full Read the
  • Ricoh 9100DN | Operating Instructions - Page 107
    When Call-light Is Lit or Blinking AQU070S 1. Use the lever to adjust the volume. 2. Push the lever to switch the buzzer on/off. 9 105
  • Ricoh 9100DN | Operating Instructions - Page 108
    9. Troubleshooting When the Machine does Not Print If the printing does not start even with printing instructions, check the following. Is the power on? Check the power p.104 "When Call-light Is Lit or Blinking". If the problem cannot be resolved, contact your sales or service representative. 106
  • Ricoh 9100DN | Operating Instructions - Page 109
    to the following port:] list, confirm the correct port is selected. Windows 2000 1. Click the [Start] button, point to [Settings], and then click [Printers]. 2. Click the icon of the machine. On the [File] menu, click [Properties]. 3. Click the [Ports] tab. 4. In the [Print to the following port
  • Ricoh 9100DN | Operating Instructions - Page 110
    Troubleshooting Other Printing Problems If the printed image is differs from the computer's instructions, check the following: Toner paper settings. See p.63 "Loading Paper". • Check the printer driver's paper settings. See the printer driver Help. • Check that the paper is not curled or bent
  • Ricoh 9100DN | Operating Instructions - Page 111
    Paper". Check the printer driver's paper settings. See the printer driver Help. • The fusing unit is deteriorated or damaged. Replace the unit. Contact your service representative. PDF Direct Print is not executed (PDF files do not print). • When printing a password-protected PDF file, set
  • Ricoh 9100DN | Operating Instructions - Page 112
    9. Troubleshooting The paper size appears on the control panel and printing may not be set properly. Contact your sales service representative. Multiple pages are fed at once. • There may be a gap between the front guide and the paper, or between the side guides and the paper in the paper tray.
  • Ricoh 9100DN | Operating Instructions - Page 113
    guides and the paper in the paper tray. Make sure there are no gaps. • The fusing unit is deteriorated or damaged. Replace the unit. Contact your service representative Paper is not fed from the selected tray. • If you are using a Windows operating system, the settings made using the printer driver
  • Ricoh 9100DN | Operating Instructions - Page 114
    , select [Fast]. • See the printer driver Help. • The data is so large or complex that it takes time to process. If the Data In indicator is blinking, data is being processed. Simply wait until printing resumes. If the problem cannot be resolved, contact your sales or service representative. 9 112
  • Ricoh 9100DN | Operating Instructions - Page 115
    Troubleshooting Additional Troubleshooting Troubles related to the printer service representative. No e-mail received when an alert occurs, and after resolving an alert. • Access the printer Alert-notification e-mail is not sent if the problem is resolved before sending. However, an Alertresolved
  • Ricoh 9100DN | Operating Instructions - Page 116
    9. Troubleshooting • If an Alert-notification e-mail, set with the earlier notification level, arrives, later e-mail will from the SNTP server. Refer to the Web Image Monitor's Help for the appropriate settings. If the problem cannot be resolved, contact your sales or service representative. 9 114
  • Ricoh 9100DN | Operating Instructions - Page 117
    Pausing Print When Using Finisher Pausing Print When Using Finisher You can pause a large volume of prints when using Finisher. 1. Press the [Suspend/Resume] key. The key lights up. ANQ082S 2. Remove the stack of paper from the finisher shift tray. 9 ANQ083S 3. Press the [Suspend/Resume] key. The
  • Ricoh 9100DN | Operating Instructions - Page 118
    9. Troubleshooting Removing Jammed Staples • Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple unit. You can trap
  • Ricoh 9100DN | Operating Instructions - Page 119
    4. Pull the cartridge gently out of the staple unit. Removing Jammed Staples AST025S 5. Push the buttons on either side of the cartridge and open the plate. AST121S 6. Remove the jammed staples. AST122S 7. Pull the plate facing down until it clicks. 9 117
  • Ricoh 9100DN | Operating Instructions - Page 120
    9. Troubleshooting AST123S 8. Reinstall the cartridge, pushing it into the unit until it clicks. AST060S 9. Return the staple unit to its original position. 10. Close the finisher's
  • Ricoh 9100DN | Operating Instructions - Page 121
    Removing Jammed Staples AST038S 3. Open the face plate of the cartridge. AST039S 4. Remove the jammed staples. AST040S 5. Pull the face plate down until it clicks. 9 119
  • Ricoh 9100DN | Operating Instructions - Page 122
    9. Troubleshooting AST041S 6. Hold the green lever while pushing in the cartridge until it clicks. AST042S Return the staple unit to its original position. 7. Close the finisher's
  • Ricoh 9100DN | Operating Instructions - Page 123
    3. Pull the lever S2. Pull out the cartridge gently. Removing Jammed Staples AST044S 4. Open the face plate of the cartridge. AST045S 5. Remove the jammed staples. AST046S 6. Pull the face plate up until it clicks. 9 121
  • Ricoh 9100DN | Operating Instructions - Page 124
    9. Troubleshooting AST047S 7. Hold the green lever while pushing in the cartridge until it clicks. Return the lever S2 to its original position. AST048S Return the staple unit to its original position. 8. Close the finisher's front cover. 9 122
  • Ricoh 9100DN | Operating Instructions - Page 125
    Removing Staple Waste 1. Open the finisher's front cover. Removing Staple Waste AST124S 2. Release the stopper from the staple waste box, and then pull it gently out. AST125S AST126S 3. Empty the box. 4. Reinstall the staple waste box, and then reposition the stopper. 5. Close the finisher's
  • Ricoh 9100DN | Operating Instructions - Page 126
    9. Troubleshooting Removing Punch Waste When the "Empty Punch Receptacle" message appears, you cannot use the Punch function. Finisher SR841 The following procedure explains how to remove
  • Ricoh 9100DN | Operating Instructions - Page 127
    Removing Punch Waste Finisher SR4000 The following procedure explains how to remove punch wastes from the Finisher SR4000. 1. Open the finisher's front cover. AST061S 2. Pull out the punch waste box carefully, and then remove punch waste. AST062S 9 3. Reinstall the punch waste box. If you do
  • Ricoh 9100DN | Operating Instructions - Page 128
    9. Troubleshooting 9 126
  • Ricoh 9100DN | Operating Instructions - Page 129
    on your hands or clothes. • Toner on prints made after removing misfed paper may be loose (inadequately fused). Make a few test prints until smudges no longer appear. • Do not forcefully remove misfed paper, as it will tear. Torn pieces remaining inside the printer will cause further misfeeds and
  • Ricoh 9100DN | Operating Instructions - Page 130
    10. Removing Misfed Paper AST016S 2. Push the button A and open the guide plate. 3. Remove misfed paper. AST144S 10 AST145S 4. Close the guide plate, and then close the front cover. 5. Open the top cover. 128
  • Ricoh 9100DN | Operating Instructions - Page 131
    Removing Misfed Paper 6. Remove misfed paper. AST146S AST147S 7. Close the top cover. 8. If the error message persists, open the front cover. 9. Turn the lever C1 to the left. ASU515S 10. Turn lever C2 counterclockwise and remove misfed paper. After removing the paper, return the lever to its
  • Ricoh 9100DN | Operating Instructions - Page 132
    may be difficult to remove depending on the paper size set. Follow step 8 to remove it. Remove Misfeed B-F: Internal A paper jam has occurred inside the printer. 10 AST021S 1. Open the front cover. AST016S 2. Turn knob B1 counterclockwise and remove misfed paper. 130
  • Ricoh 9100DN | Operating Instructions - Page 133
    Removing Misfed Paper ASU513S 3. Return the lever B2 to its original position. ASU514S After removing the paper, return the lever to its original position. If you cannot remove the paper, proceed to the following step. 4. Turn the lever C1 to the left. ASU515S 5. Turn the lever C2 counterclockwise
  • Ricoh 9100DN | Operating Instructions - Page 134
    10. Removing Misfed Paper ASU516S After removing the paper, return the lever to its original position. If you cannot remove the paper, proceed to the following step. 6. Turn the fuser unit knob D1/E 11-12 times counterclockwise to eject the paper. AST134S 7. Pull the handle D2 and pull out the
  • Ricoh 9100DN | Operating Instructions - Page 135
    Removing Misfed Paper 9. Raise the lever D4. AST136S AST137S 10. Remove the paper being careful not to touch the area around the lever D4. 10 AST138S After removing the paper, return the lever and the unit to their original positions. If you cannot remove the paper, proceed to the following step.
  • Ricoh 9100DN | Operating Instructions - Page 136
    10. Removing Misfed Paper 12. Raise the lever E3. AST139S AST140S 13. Remove the paper being careful not to touch the area around the lever E3. 10 AST141S After removing the paper, return the lever and the unit to their original positions. If you cannot remove the paper, proceed to the following
  • Ricoh 9100DN | Operating Instructions - Page 137
    Removing Misfed Paper 15. Remove misfed paper. AGU142S AST143S 16. Return each unit and lever to their original positions, and then close the front cover of the machine. Remove Misfeed Q: Interposer A paper jam has occurred in one of the paper trays or the large capacity tray (LCT, optional). 10
  • Ricoh 9100DN | Operating Instructions - Page 138
    10. Removing Misfed Paper 2. Raise the feed roller. AST148S 3. Remove misfed paper. AST149S 10 AST150S 4. Lower the feed roller, and then close the interposer's upper cover. 5. If the error message persists, open the finisher's front cover. 136
  • Ricoh 9100DN | Operating Instructions - Page 139
    Removing Misfed Paper AST151S 6. Lower the lever Q1, and then remove misfed paper. AST152S 7. If you cannot remove the paper, lower the Q2 lever, and then remove misfed paper. AST153S 8. Raise the lever Q1, and then close the finisher's front cover. Remove Misfeed R: Finisher A paper jam has
  • Ricoh 9100DN | Operating Instructions - Page 140
    10. Removing Misfed Paper Finisher SR841 AST023S 1. Open the finisher's front cover. AST154S 2. Raise the lever R1, and remove misfed paper. 10 AST155S After removing the paper, return the lever to its original position. 3. If you cannot remove the paper, raise the lever R2, and then remove misfed
  • Ricoh 9100DN | Operating Instructions - Page 141
    Removing Misfed Paper AST156S After removing the paper, return the lever to its original position. 4. If you cannot remove the paper, raise the lever R3, and then remove misfed paper. AST157S After removing the paper, return the lever to its original position. 5. If you cannot remove the paper,
  • Ricoh 9100DN | Operating Instructions - Page 142
    10. Removing Misfed Paper AST159S After removing the paper, return the lever to its original position. 7. If you cannot remove the paper, raise the lever R6, and then remove misfed paper. AST160S After removing the paper, return the lever to its original position. 8. If you cannot remove the paper,
  • Ricoh 9100DN | Operating Instructions - Page 143
    Finisher SR4000 Removing Misfed Paper AST024S 1. Open the finisher's front cover. 2. Turn the blue lever R1 counterclockwise. AST026S 3. Turn the blue knob R2 counterclockwise. When the optional interposer is installed, lower lever Q2, and then turn the knob R2 counterclockwise. 10 4. Remove
  • Ricoh 9100DN | Operating Instructions - Page 144
    10. Removing Misfed Paper AST028S After removing the paper, return the lever to its original position. 5. If you cannot remove the paper, raise the lever R3, and then remove misfed paper. AST029S 6. Raise the lever R4, and then remove misfed paper. 10 AST030S After removing the paper, return the
  • Ricoh 9100DN | Operating Instructions - Page 145
    Removing Misfed Paper AST030S After removing the paper, return the lever to its original position. 8. If you cannot remove the paper, lower the lever R6, and then remove misfed paper. AST032S After removing the paper, return the lever to its original position. 9. If you cannot remove the paper,
  • Ricoh 9100DN | Operating Instructions - Page 146
    10. Removing Misfed Paper AST034S 11. Pull the lever R10 and pull out the staple unit, and then remove misfed paper. AST035S 12. If you cannot remove the paper, open the lever R11, and then remove misfed paper. 10 AST036S After removing the paper, return the lever to its original position. 13. If
  • Ricoh 9100DN | Operating Instructions - Page 147
    Removing Misfed Paper AST037S After removing the paper, return the lever to its original position. Return the staple unit to its original position. 14. Close the finisher's front cover. 10 145
  • Ricoh 9100DN | Operating Instructions - Page 148
    10. Removing Misfed Paper 10 146
  • Ricoh 9100DN | Operating Instructions - Page 149
    11. Appendix Moving and Transporting the Printer When you move and transport your machine, contact the store where it was purchased or where service is provided. 11 147
  • Ricoh 9100DN | Operating Instructions - Page 150
    11. Appendix Disposal To dispose of the machine, contact the store where it was purchased or where service is provided. 11 148
  • Ricoh 9100DN | Operating Instructions - Page 151
    sales or service representative. Toner bottles Toner bottle Number of pages per bottle 43,000 • Toner bottles toner bottle might require replacement before 1,000 pages have been printed. • Toner bottles (a consumable) are not covered by warranty. However, in the event of defects or other problems
  • Ricoh 9100DN | Operating Instructions - Page 152
    beam scanning & electrophotographic printing Dual component toner development First Print Speed: 5.5 sec. It requires a USB computer port and cable that support USB 2.0. Optional: • IEEE 802.11b (Wireless LAN 300 dpi (PCL 5e, PDF) Printer Language: PCL 6, PCL 5e, RPCS, PostScript 3, PDF Fonts: PCL
  • Ricoh 9100DN | Operating Instructions - Page 153
    2:24, Type 14:112) Paper Size See p.57 "Paper and Other Media Supported by This Printer". Paper Weight: 52.3 - 216 g/m2 (45 - 180 kg, 14 /27.6" × 30.4" × 58.6" (without finisher) Weight: Less than 188 kg (without toner) Warm-up Time: Less than 300 seconds (23 °C, 73 F) Paper Capacity: Tandem paper
  • Ricoh 9100DN | Operating Instructions - Page 154
    11. Appendix Standard paper tray Paper weight: 60 - 105 g/m2 (16 - 28 lb.) Memory: 256 MB Hard Disk Drive : 80 GB Network : Topology: Ethernet (10BaseT/100BaseTX) Protocol: TCP/IP, SMB, IPX/SPX, AppleTalk 550 sheets × 2 (80 g/m2, 20 lb.) Options Finisher SR841 (100-Sheet Staples) [Finisher
  • Ricoh 9100DN | Operating Instructions - Page 155
    Specification • 1,500 sheets (A3 , B4 JIS , A4 , B5 JIS , 11 × 17 , 81/2 × 14 , 81/2 × 11 , 12 × 18 ) (80 g/m2, 20 lb.) • 500 sheets (A5 , 51/2 × 81/2 ) (80 g/m2, 20 lb.) • 100 sheets (A5 , 51/2 × 81/2 ) (80 g/m2, 20 lb.) Staple paper size: A3 , B4 JIS , A4 , B5 JIS , 11 × 17 ,81/2 × 14 Staple
  • Ricoh 9100DN | Operating Instructions - Page 156
    11. Appendix • 250 sheets (A4 , B5 JIS , A5 , B6 JIS , 81/2 × 11 g/m2, 20 lb.) , 51/2 × 81/2 ) (80 • 50 sheets (A3 , B4 JIS , 11 × 17 , 81/2 × 14 , 12 × 18 ) (80 g/m2, 20 lb.) [Finisher Shift Tray 1] Paper sizes: A3 , B4 JIS , A4 , 51/2 × 81/ 4 14 Paper weight: , B5 JIS , 12 × 18 52 - 216 g/
  • Ricoh 9100DN | Operating Instructions - Page 157
    Specification Staple position: 4 position (Top, Top Slant, Bottom, 2 Staples) [Finisher Shift Tray 2] Paper size: A3 , B4 JIS , A4 , 51/2 × 81/2 81/4 × 14 Paper weight: , B5 JIS , A5 , B6 JIS , A6 , 11 × 17 , 81/2 × 14 , 81/2 × 11 , 12 × 18 , 71/4 × 101/2 , 8 × 13 , 81/2 × 13 , 81/4 × 13 , 52
  • Ricoh 9100DN | Operating Instructions - Page 158
    11. Appendix • 125 sets (2 - 9 sheets) (A4 , B5 JIS , 81/2 × 11 )(80 g/m2, 20 lb.) • 125 - 40 sets (10 - 30 sheets) (other paper size)(80 g/m2, 20 lb.) • 125 sets (2 - 9 sheets) (other paper size) (80 g/m2, 20 lb.) With mixed sizes: • 50 sets (2 - 30 sheets) (A4 /A3 , B5 JIS /B4 JIS , 81/2 × 11
  • Ricoh 9100DN | Operating Instructions - Page 159
    Specification 2 holes 2 holes 4 holes 4 holes 2 & 4 holes type A3 - A5, 11 × 17 - 51/2 × 81/2 A4 - A5, 81/2 × 11, 51/2 × 81/2 A3, B4 JIS, 11 × 17 A4, B5 JIS, 81/2 × 11 4 holes 4 holes 4 holes type A3 - A5, 11 × 17 - 51/2 × 81/2 A4-A5, 81/2 × 11, 51/2 × 81/2 2 holes 2 holes 3 holes 3 holes 2 &
  • Ricoh 9100DN | Operating Instructions - Page 160
    11. Appendix 4 holes A4, 81/2 × 11 4 holes 4 holes 4 holes type(for Northern Europe) A3 - B5 JIS, 11 × 17 - 71/4 × 101/2 A4 - A5, 81/2 × 11, 51/2 × 81/2 4 holes 4 holes 4 holes type (for Europe) A3, B4 JIS, 11 × 17 A4, B5 JIS, 11 × 81/2 2 holes 2 holes 3 holes 3 holes 2 & 3 holes type A3 -
  • Ricoh 9100DN | Operating Instructions - Page 161
    Specification 52 - 128 g/m2, 14 - 34 lb. There are types of paper between 128 - 216 g/m2 in weight that are not supported. Paper capacity: 4,000 sheets (80 g/m2, 20 lb.) Power consumption Maximum. 50 W (power supplied from main unit) Dimensions (W × D × H, optional unit): 314 × 458 × 659 mm, 12.4 ×
  • Ricoh 9100DN | Operating Instructions - Page 162
    Unit Type I Transmission Spec.: Based on IEEE 802.11b (Wireless LAN) 11 Protocol: IPv4, IPv6, IPX/SPX, AppleTalk • SmartDeviceMonitor and Web Image Monitor are supported. Data Transfer Speed: Auto select from below speed 1 Mbps, 2 Mbps, 5.5 Mbps, 11 Mbps Frequency Range: Inch version: 160
  • Ricoh 9100DN | Operating Instructions - Page 163
    Gigabit Ethernet Board Type A Interface Connector: Ethernet (10Base - T, 100Base - TX, 1000Base - T) USB 2.0 It requires a USB computer port and cable that support USB 2.0. Data Transmission Speed: • Ethernet: 1000 Mbps, 100 Mbps, 10 Mbps • USB: 480 Mbps (High speed: USB 2.0), 12 Mbps (Full
  • Ricoh 9100DN | Operating Instructions - Page 164
    11. Appendix 11 162
  • Ricoh 9100DN | Operating Instructions - Page 165
    INDEX A Adding Paper 63 C Changing the Paper Size Tray 2 and 3 67 Copying onto Tab Stock 70 E Exterior Front View 11 Front View 11 F Finisher 115 G Gigabit Ethernet Board Type A 161 I IEEE 1284 Interface Board Type A 161 IEEE 802.11b Interface Unit 159, 160 L Large Capacity Tray (LCT 73
  • Ricoh 9100DN | Operating Instructions - Page 166
    MEMO 164 G148
  • Ricoh 9100DN | Operating Instructions - Page 167
    Copyright © 2006
  • Ricoh 9100DN | Operating Instructions - Page 168
    Hardware Guide GB GB G148-7201
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Safety Information
before using the machine.
10
8
9
Guide to the Printer
Setting Up
Connecting the Printer
Configuration
Installing the Printer Driver
Paper and Other Media
Replacing Consumables
Cleaning and Adjusting the Printer
Troubleshooting
Removing Misfed Paper
Appendix
1
2
3
4
5
6
7
11
Operating Instructions
Hardware Guide