Ricoh 9100DN Operating Instructions - Page 50
Web browser, and Configuring the Network Interface Board Using Web Browser, Software
UPC - 026649026164
View all Ricoh 9100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
4. Configuration 2. Press the [ ] or [ ] key to select [Host Interface], and then press the [ Enter] key. 3. Press the [ ] or [ ] key to select [IEEE 802.11b], and then press the [ Enter] key. 4. Press the [ ] or [ ] key to select [Comm. Mode], and then press the [ Enter] key. 4 5. Press the [ ] or [ ] key to select the transmission mode of IEEE 802.11b, and then press the [ Enter] key. • The factory default is [802.11 Ad hoc]. • To use an IEEE 802.11b card for which the SSID (Network Name) setting is not necessary, select [Ad hoc]. • The transmission mode of IEEE 802.11b can also be set using a Web browser. For details, see Web browser, and "Configuring the Network Interface Board Using Web Browser", Software Guide. 6. If [802.11 Ad hoc] or [Ad hoc] is selected for [Comm. Mode], set the channel to use for transmission. Consult your network administrator for the channel to use. 7. Press the [ ] or [ ] key to select [Channel], and then press the [ Enter] key. 8. Press the [ ] or [ ] key to select the channel, and then press the [ Enter] key. 9. Set [Trans. Speed] in the same way. 48