Ricoh 9100DN Operating Instructions - Page 51
Setting SSID, Configuring the Network Interface Board Using Web Browser Software Guide.
UPC - 026649026164
View all Ricoh 9100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
IEEE 802.11b (Wireless LAN) Configuration The factory default is [Auto]. If you need to change the transmitting speed depending on environment you are using, select the appropriate transmitting speed. 10. Print a configuration page to confirm the settings made. • For details about printing the configuration page, see p.33 "Test Printing". Setting SSID If [Infrastructure] or [802.11 Ad hoc] is selected for [Comm. Mode], set SSID to use for transmission. Consult your network administrator for the SSID to use. 1. Press the [ ] or [ ] key to select [SSID], and then press the [ Enter] key. 4 If an SSID has been set, you can check the SSID setting. 2. Press the [ ] or [ ] key to select [Enter ID], and then press the [ Enter] key. 3. Press the [ ] or [ ] key to enter characters, and then press the [ Enter] key. The number of character you have entered is displayed on the top right of the screen. The characters that can be used are ASCII 0x20-0x7e (32 bytes), 16 digits. 4. Print a configuration page to confirm the settings made. • SSID can also be set using a Web browser. For details, see the Web Image Monitor Help, and "Configuring the Network Interface Board Using Web Browser" Software Guide. • WEP key can also be set using a Web browser. For details, see Web Image Monitor Help. • For details about printing the configuration page, see p.33 "Test Printing". 49