Ricoh C232SF User Guide - Page 189
Specifying the resolution, Image Quality, Clear/Stop, Resolution, Auto Clear
UPC - 026649064432
View all Ricoh C232SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
Sending a Fax Specifying the resolution This section describes how to specify the scan resolution for the current job. There are three resolution settings: ❖ Standard Select this when the original is a printed or typewritten document with normal-sized characters. ❖ Fine Select this when the original is a document with small print. ❖ Photo Select this when the original contains images such as photographs or shaded drawings. A Press the {Image Quality} key. 6 BPC023S B Press the {Image Quality} key or {U}{T} keys to select the desired resolution setting, and then press the {OK} key. Note ❒ Press the { } key or {Clear/Stop} key to discard the current change and re- turn to the initial screen. ❒ You can change the machine's default [Resolution] setting to always scan with a specific resolution level. ❒ Temporary job settings are cleared in the following cases: • When no input is received for the period of time specified in [Auto Clear] while the initial screen is displayed. • When the {Clear/Stop} key is pressed while the initial screen is displayed. • When the machine's mode is changed. • When the power is turned off. • When the machine's default for the same setting is changed. Reference For details about [Resolution], see p.209 "Fax Transmission Settings". For details about [Auto Clear], see p.231 "Administrator Settings". 179