Rocketfish RF-500WPS2 User Manual (English) - Page 8
Troubleshooting, Specifications - 500
UPC - 600603128295
View all Rocketfish RF-500WPS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Starting your computer To start your computer: 1 Turn on the power supply by setting the power switch on the power supply to the "I" (on) position. 2 Turn on your computer by pressing the power button on the front of your computer. Troubleshooting If the power supply fails to function properly, check the following before returning it for repair: • Make sure that the power cord is plugged correctly into an AC power outlet and into the power supply. • Make sure that the power switch on the power supply is switched to the "I" (on) position. • Make sure that all power connectors are properly connected to all components. Specifications Input voltage Input frequency Overcurrent protection Active PFC Output Rated wattage Peak wattage Minimum: 90 V Normal: 100 V ~ 240 V Maximum: 265 V Minimum: 47 Hz Maximum: 63 Hz Input fuse Power factor: equal to or greater than 0.99 @115V/60 Hz full load +3.3V Maximum load 18.0 A Minimum load 0.5 A +5 V Maximum load 18.0 A Minimum load 0.5 A +12 V1 Maximum load 18.0 A Minimum load 1.0 A +12 V2 Maximum load 18.0 A Minimum load 1.0 A -12 V Maximum load 0.3 A Minimum load 0.0 A +5 VSB Maximum load 2.5 A Minimum load 0.0 A Note: +3.3 V and +5 V total output not to exceed 130 W +12 V1 and +12V2, combined output not to exceed 36A 500 W 600 W RF-500WPS2 9