Rocketfish RF-500WPS2 User Manual (English) - Page 9

Environmental, Safety compliance

Page 9 highlights

Efficiency Standby Output ripple and noise Output protection Over voltage protection Short circuit protection Over current protection Hi-Pot (the power supply is capable of withstanding) Leakage current Grounding resistance Environmental Operating temperature Storage temperature Operating humidity (non-condensing) Vibration (non-operating) Safety compliance Safety approval 80% (minimum) at full load 80% at typical load 80% at light load

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

10
Efficiency
80% (minimum) at full load
80% at typical load
80% at light load
Standby
<1 W when +5 VSB <0.1 A @115 V/60 Hz
Output ripple and noise
+3.3 V
50 mV p-p
+5 V
50 mV p-p
+12 V 1 and 2
120 mV p-p
-12 V
120 mV p-p
+5 VSB
50 mV p-p
Output protection
Yes
Over voltage protection
Yes
Short circuit protection
Yes
Over current protection
Yes
Hi-Pot (the power supply is
capable of withstanding)
Input to ground voltage:
1800 VAC
Test time:
3.0 S
Cutoff current (maximum):
10 mA
Leakage current
3.5 mA maximum (at 230 Vrms, 50 Hz)
Grounding resistance
100 mOhm maximum at 25 A
Environmental
Operating temperature
32°F to 104°F (0°C to 40°C)
Storage temperature
-40°F to 131°F (-40°C to 55°C)
Operating humidity
(non-condensing)
5% to 95% RH
Vibration (non-operating)
Swing: 0.35 mm
Frequency: 10-55-10 Hz
Degree: 5 times per axis, 30 minutes, log sweep p-p
Acceleration: 19.98 m/s
2
@ a frequency of 55 Hz
Safety compliance
IEC60950-1, EN60950-1, UL60950-1, and GB4943
Safety approval
UL, C-UL, and FCC