Rocketfish RF-WHP212 User Manual (English) - Page 14

Using the headphones - pairing

Page 14 highlights

• When the headphones are fully charged (which takes about four hours), the docking station CHARGING indicator turns green. • When the headphone battery charge is low, the POWER/PAIRING indicator on the headphones blinks red. The POWER/PAIRING indicator on the headphones turns red 30 minutes prior to the batteries being exhausted. Note: It can take about four hours to charge the batteries. The batteries will last up to ten hours with continuous use (depending on the headphone volume level and distance from the docking station or other Rocketboost sender). Note: The headphones cannot be charged when the docking station is turned off. Using the headphones Turning on the system To turn on the system: 1 Slide the ON/OFF switch on the docking station to ON. The PAIRING indicator on docking station blinks rapidly (blue). 2 Slide the POWER switch on the left earpiece to turn on the headphones. The POWER/PAIRING indicator on headphone blinks rapidly (blue). 3 When the POWER/PAIRING indicator on headphones and PAIRING indicator on docking station both light steadily blue, an active link is established between headphone and docking station. The system is now on and ready to be used. Note: Autopairing takes 5-10 seconds. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

14
When the headphones are fully charged (which takes
about four hours), the docking station
CHARGING
indicator turns green.
When the headphone battery charge is low, the
POWER/PAIRING
indicator on the headphones blinks
red. The
POWER/PAIRING
indicator on the headphones
turns red 30 minutes prior to the batteries being
exhausted.
Note:
It can take about four hours to charge the batteries. The
batteries will last up to ten hours with continuous use
(depending on the headphone volume level and distance from
the docking station or other Rocketboost sender).
Note
: The headphones cannot be charged when the docking
station is turned off.
Using the headphones
Turning on the system
To turn on the system:
1
Slide the
ON/OFF
switch on the docking station to ON. The
PAIRING
indicator on docking station blinks rapidly (blue).
2
Slide the
POWER
switch on the left earpiece to turn on the
headphones. The
POWER/PAIRING
indicator on headphone
blinks rapidly (blue).
3
When the
POWER/PAIRING
indicator on headphones and
PAIRING
indicator on docking station both light steadily
blue, an active link is established between headphone and
docking station. The system is now on and ready to be used.
Note
: Autopairing takes 5-10 seconds.