Ryobi JS451L English Manual - Page 16
Adjustments
View all Ryobi JS451L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
ADJUSTMENTS WARNING: Before performing any adjustment, make sure the product is unplugged from the power supply and the switch is in the OFF ( O ) position. Failure to heed this warning could result in serious personal injury. tightening BASE ADJUSTMENT LEVER See Figures 15 - 16. The base adjustment lever may need occasional tightening. Unplug the saw. If attached, remove the vacuum attachment. Remove the base plate screws and base plate by remov- ing the four base screws to expose the adjusting nut. Release the base adjustment lever by pulling it forward. Tighten the adjusting nut 1/4 of a turn in the clockwise direction. Engage the adjustment lever by pushing it back under the motor assembly and check the base for any movement. If the base is still loose, release the adjustment lever and tighten the adjusting nut another 1/4 of a turn. Repeat until the base is secure after engaging the adjustment lever. Reinstall the base plate and four base plate screws. base plate Screws base plate base adjusting nut Fig. 15 16 - English Fig. 16