Ryobi P212 English Manual
Ryobi P212 Manual
 |
View all Ryobi P212 manuals
Add to My Manuals
Save this manual to your list of manuals |
Ryobi P212 manual content summary:
- Ryobi P212 | English Manual - Page 1
TORQUE IV™ 1/2 in., 18 VOLT HAMMER DRILL 2-SPEED P211 BATTERIES AND CHARGERS SOLD SEPARATELY Your hammer drill has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble - Ryobi P212 | English Manual - Page 2
or materials in your RYOBI® power tool for a period of two years from the date of purchase. With the exception of batteries, power tool accessories are warranted for ninety (90) days. Batteries are warranted for two years. HOW TO GET SERVICE: Just return the power tool, properly packaged and postage - Ryobi P212 | English Manual - Page 3
may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE INSTRUCTIONS WORK AREA SAFETY Keep work area clean and well lit. Cluttered or - Ryobi P212 | English Manual - Page 4
the battery may cause irritation or burns. SERVICE Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. WARNING! To reduce the risk of injury, user must read instruction manual. When - Ryobi P212 | English Manual - Page 5
moving parts or otherwise service power tool. If you loan someone this tool, loan them these instructions also to prevent misuse of the product and possible injury. IMPORTANT SAFETY INSTRUCTIONS 1. SAVE THESE INSTRUCTIONS This manual contains important safety and operating instructions for battery - Ryobi P212 | English Manual - Page 6
tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power . Read The Operator's Manual To reduce the risk of injury, user must read and understand operator's manual before using this product. - Ryobi P212 | English Manual - Page 7
until you read thoroughly and understand completely the operator's manual. Save this operator's manual and review frequently for continuing safe operation and instructing others who may use this product. WARNING: The operation of any power tool can result in foreign objects being thrown into your - Ryobi P212 | English Manual - Page 8
FEATURES PRODUCT SPECIFICATIONS Chuck 1/2 in. Keyless Motor 18 Volt DC Switch Variable Speed No Load Speed 0-440/0-1,600 r/min. (RPM) Hammer Speed 0-5,720/0-20,800 BPM* *Blows Per Minute Clutch 24 position Torque Maximum 330 in.lb. Charger Input 120 V, 60 Hz, AC only Charge Rate 1 Hour - Ryobi P212 | English Manual - Page 9
equipped with an auxiliary handle for ease of operation and to prevent loss of control. BIT STORAGE Bits provided with the drill can be placed in the storage area, located on the base of the drill. BLOWS PER MINUTE This tool features an impact speed of 0-5,720/0-20,800 BPM (Blows Per Minute). Blows - Ryobi P212 | English Manual - Page 10
call 1-800-525-2579 for assistance. PACKING LIST Hammer Drill with Auxiliary Handle Assembly Magnetic Bit Holder Bits (2) Lanyard (Not included in combo) Operator's Manual Warranty Registration Card WARNING: If any parts are damaged or missing do not operate this tool until the damaged or missing - Ryobi P212 | English Manual - Page 11
If the charger does not charge the battery pack under normal circumstances, return both the battery pack and charger to your nearest Authorized Service Center for electrical check. Charge the battery pack only with the charger provided. Make sure the power supply is normal household voltage, 120 - Ryobi P212 | English Manual - Page 12
charger. If the green LED continues to remain on, return battery pack to your nearest Ryobi Authorized Service Center for checking or replacing. NOTE: This situation only occurs when continuous use of the tool causes the batteries to become hot. It does not occur under normal circumstances. Refer - Ryobi P212 | English Manual - Page 13
part of the switch function. DIRECTION OF ROTATION SELECTOR (FORWARD/REVERSE/CENTER LOCK) See Figure 5. The direction of bit rotation is reversible and is controlled by a selector located above the switch trigger. With the drill and use power of the drill to tighten the chuck jaws on the drill bit. - Ryobi P212 | English Manual - Page 14
Use LO (1) speed for high power and torque applications and HI (2) speed for fast drilling or driving applications. NOTE: If you have difficulty changing from one gear range to the other, turn the chuck by hand until the gears engage. CAUTION: Never change gears while the tool is running. Failure to - Ryobi P212 | English Manual - Page 15
work where speed is more important than precise control 2. SPEED 1/LOW 2/HIGH 1/LOW 3. MODE DRILL MODE (TORQUE ADJUSTMENT NOT ACTIVE) DRIVE MODE 2/HIGH 1/LOW 2/HIGH HAMMER MODE TORQUE ADJUSTMENT See Figure 10. When using the drill-driver for various driving applications, it becomes necessary to - Ryobi P212 | English Manual - Page 16
STORAGE See Figure 11. When not in use, bits provided with the drill can be placed in the storage areas located on the base of the drill. MAG TRAY™ See Figure 12. The magnetic tray conveniently stores screws or other small parts. MAGNETIC BIT HOLDER See Figure 12. The magnetic bit holder extends - Ryobi P212 | English Manual - Page 17
the desired depth of cut. It also secures the auxiliary handle. ADJUSTING THE DEPTH STOP ROD See Figure 15. The depth stop rod helps control the depth of drilled holes. For convenience and ease of starting threads, the hex nut has been trapped inside the molded slot in the auxiliary handle. To - Ryobi P212 | English Manual - Page 18
into the chuck jaws at an angle then tighten, as shown in figure 17. This could cause the drill bit to be thrown from the drill, resulting in possible serious personal injury or damage to the chuck. Rotate the chuck clockwise to tighten the chuck jaws securely on the bit. NOTE: - Ryobi P212 | English Manual - Page 19
side pressure to elongate a hole. Let the tool do the work. WARNING: Be prepared for binding at bit breakthrough. When these situations occur, drill has a tendency to grab and kick opposite to the direction of rotation and could cause loss of control when breaking through material. If not prepared - Ryobi P212 | English Manual - Page 20
MAINTENANCE WARNING: When servicing, use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also - Ryobi P212 | English Manual - Page 21
the switch trigger by placing the direction of rotation selector in center position. Insert a 5/16 in. or larger hex key into the chuck of the drill and tighten the chuck jaws securely. Tap the hex key sharply with a mallet in a clockwise direction. This will loosen the screw in the chuck for - Ryobi P212 | English Manual - Page 22
'S MANUAL TORQUE IV™ 1/2 in., 18 VOLT HAMMER DRILL 2-SPEED P211 WARNING: Some dust created by power sanding, sawing, grinding, drilling, . • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Authorized Service Center.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
 |
 |
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your hammer drill has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for your purchase.
OPERATOR’S MANUAL
TORQUE IV
™
1/2 in., 18 VOLT HAMMER DRILL
2-SPEED
P211
BATTERIES AND CHARGERS
SOLD SEPARATELY