Ryobi P521 English Manual - Page 11

OPERATION TO INSERT BATTERY PACK See Figure 3.  Lock the switch trigger by releasing it all the way.  Place the battery pack on the tool.  Make sure the latches on each side of the battery pack snap into place and the battery pack is secured on the tool before beginning operation. CAUTION: When placing battery pack in the tool, be sure raised rib on battery pack aligns with the grooves in the saw and latches into place properly. Improper installation of the battery pack can cause damage to internal components. TO REMOVE BATTERY PACK See Figure 3.  Lock the switch trigger by releasing it all the way.  Depress the latches on the side of battery pack.  Remove the battery pack from the tool. BLADE STORAGE See Figure 4. The blade storage compartment is located on the back of the saw. It is convenient for storing extra blades and storing blades when not in use.  To open: Push the door down with your thumb or finger. Place blades in blade storage compartment.  To close: Push the door up with your thumb or finger. WARNING: Battery tools are always in operating condition. Therefore, switch should always be locked when not in use or carrying at your side. LOCK-OFF BUTTON See Figure 5. The lock-off button is located on the handle above the switch trigger. You must depress the lock-off button in order to pull the switch trigger. The lock resets each time the trigger is released. NOTE: You can depress the lock-off button from either the left or right side. SWITCH TRIGGER See Figure 5. To turn the saw ON, depress and hold lock-off button, then depress the switch trigger. To turn it OFF, release the switch trigger. DEPRESS LATCHES TO RELEASE BATTERY PACK LATCHES BATTERY PACK Fig. 3 T-SHANK SAW BLADE BLADE STORAGE Fig. 4 LOCK-OFF BUTTON SWITCH TRIGGER Fig. 5 11