Ryobi P825 Operation Manual - Page 2

GENERAL POWER TOOL SAFETY WARNINGS  Use personal protective equipment. Always wear eye WARNING protection. Protective equipment such as dust mask, Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.  Prevent unintentional starting. Ensure the switch is in Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool. the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. WORK AREA SAFETY  Remove any adjusting key or wrench before turning  Keep work area clean and well lit. Cluttered or dark areas invite accidents.  Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.  Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.  Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.  Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. ELECTRICAL SAFETY  Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.  Avoid body contact with earthed or grounded surfaces  If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.  Do not wear loose clothing or jewelry. Contain long hair. Loose clothes, jewelry, or long hair can be drawn into air vents. such as pipes, radiators, ranges and refrigerators.  Do not use on a ladder or unstable support. Stable There is an increased risk of electric shock if your body footing on a solid surface enables better control of the is earthed or grounded. power tool in unexpected situations.  Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.  Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.  When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.  If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock. POWER TOOL USE AND CARE  Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.  Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.  Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.  Store idle power tools out of the reach of children and  Use this product only with batteries and chargers listed do not allow persons unfamiliar with the power tool in tool/appliance/battery pack/charger correlation or these instructions to operate the power tool. Power supplement 987000-432. tools are dangerous in the hands of untrained users. PERSONAL SAFETY  Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any  Stay alert, watch what you are doing and use common other condition that may affect the power tool's sense when operating a power tool. Do not use a operation. If damaged, have the power tool repaired power tool while you are tired or under the influence of before use. Many accidents are caused by poorly drugs, alcohol or medication. A moment of inattention maintained power tools. while operating power tools may result in serious personal  Keep cutting tools sharp and clean. Properly maintained injury. cutting tools with sharp cutting edges are less likely to bind and are easier to control. 2 - English