Ryobi RTS12 Operation Manual - Page 18
To Change Riving Knife Positions
View all Ryobi RTS12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
ASSEMBLY TO CHANGE RIVING KNIFE POSITIONS See Figure 11. This saw is shipped with a riving knife that should be placed in the "down" position for non-through cutting and must be placed in the "up" position for all other cutting operations. Unplug the saw. To place in the "up" position for all through cutting: Remove the throat plate. Raise the saw blade by turning the height/bevel adjusting handwheel clockwise. Unlock the release lever by pulling it up. Grasp the riving knife and pull it towards the right side of the saw to release the riving knife from the spring-loaded riving clamp. Pull the riving knife up until the internal pins are engaged and the riving knife is above the saw blade. Lock the release lever by pushing the lever down. Reinstall the throat plate. To place in riving knife "down" position for all nonthrough cutting: Remove the throat plate. Raise the saw blade by turning the height/bevel adjusting handwheel clockwise. Unlock the release lever by pulling it up. Grasp the riving knife and pull it towards the right side of the saw to release the riving knife from the spring-loaded riving clamp. Push the riving knife down until it is below the saw blade. Pull the riving knife up until the internal pins are engaged and the riving knife is above the saw blade. Lock the release lever by pushing the lever down. Reinstall the throat plate. RELEASE LEVER (UNLOCKED) IN "UP" POSITION FOR THROUGH CUTTING RELEASE LEVER (LOCKED) IN "DOWN" POSITION FOR NON-THROUGH CUTTING Fig. 11 18 - English