Samsung CL-21N11MJ User Manual (user Manual) (ver.1.0) (English) - Page 14
Connecting a VCR, INSTALLATION
View all Samsung CL-21N11MJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
INSTALLATION 4 Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the B-IN terminal on the RF(A/B) switch. Incoming Cable Splitter Cable Box RF (A/B) Switch 5 Connect another cable between the other OUT terminal on the splitter and the A-IN terminal on the RF (A/B) switch. Incoming Cable Splitter Cable Box RF (A/B) Switch 6 Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the VHF/UHF terminal on the rear of the TV. Incoming Cable Splitter Cable Box RF (A/B) Switch TV Rear After you've made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch to "B", you will need to tune your TV to the cable box's output channel, which is usually channel 3 or 4.) Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 11-13). Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Unplug the cable or antenna from the back of the TV. 2 Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR. Incoming Cable or Antenna VCR Rear Panel 14