Samsung CLX-4195 User Guide - Page 263

Fax 5 Item Receiving setup Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see "Menu overview" on page 36). To change the menu options: • Press (fax) > (Menu) > Fax Setup > Receiving on the control panel. • Or press Setup > Machine Setup > Next > Default Setting > Fax Default on the touch screen. • Or press Setup > Machine Setup> Next > Fax Setup on the touch screen. Rcv Start Code Auto Reduction Discard Size DRPD Mode Item Receive Mode Ring To Answer Stamp RCV Name Description Selects the default fax receiving mode (see "Changing the receive modes" on page 327). Specifies the number of times the machine rings before answering an incoming call. Automatically prints the page number, and the date and time of reception at the bottom of each page of a received fax. Duplex Print Description Initiates fax reception from an extension phone plugged into the EXT socket on the back of the machine. If you pick up the extension phone and hear fax tones, enter the code. It is preset to *9* at the factory. Automatically reduces an incoming fax page to fit the size of the paper loaded in the machine. Discards a specific length from the end of the received fax. Enables a user to use a single telephone line to answer several different telephone numbers. You can set the machine to recognize different ring patterns for each number. This setting may not be available depending on your country (see "Receiving faxes using DRPD mode" on page 328). Prints the received fax data on both sides of the paper. You can save the paper usage. • Off: Prints only one side of the paper. • Long Edge: Prints both sides of the paper; however, the binding will be the long edge. • Short Edge: Prints both sides of the paper; however, the binding will be the short edge. 3. Useful Setting Menus 262