Samsung DVE45T3400W/A3 User Manual - Page 48
Water drips from the, nozzle when STEAM, CARE starts., Sprayed water is not, visible during STEAM
View all Samsung DVE45T3400W/A3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Troubleshooting Problem Water drips from the nozzle when STEAM CARE starts. Sprayed water is not visible during STEAM CARE. Extended time. Action • This is steam condensation. The dripping water will stop after a short time. • Sprayed water is difficult to see when the door is closed. • Sensor Dry automatically senses the moisture in the load and shuts the dryer off when the selected dryness level is reached. The drying time can change according to the type and amount of laundry. See the cycle chart for reference. If a problem persists, contact a local Samsung service center. Troubleshooting 48 English DV3400T_DC68-03784M-00_EN.indd 48 2020-06-11 10:01:24
Troubleshooting
Troubleshooting
English
48
Problem
Action
Water drips from the
nozzle when STEAM
CARE starts.
•
This is steam condensation. The dripping water will stop after
a short time.
Sprayed water is not
visible during STEAM
CARE.
•
Sprayed water is difficult to see when the door is closed.
Extended time.
•
Sensor Dry automatically senses the moisture in the load
and shuts the dryer off when the selected dryness level is
reached.
The drying time can change according to the type and
amount of laundry. See the cycle chart for reference.
If a problem persists, contact a local Samsung service center.
DV3400T_DC68-03784M-00_EN.indd
48
2020-06-11
°° 10:01:24