Samsung DW7933LRASR/AA User Manual Ver.1.0 (English, French, Spanish) - Page 12

Basic Guidelines

Page 12 highlights

Using your dishwasher BASIC GUIDELINES 1. Open the door and load your dishes (see page 16). - Place dishes into the upper and lower racks. - Remove any food remains from the dishes before placing them in the rack(s). - After placing the dishes into the racks, rotate the nozzles by hand to check whether any of the dishes will interfere with them. - Push the racks back so that they are in place. - Make sure the dishes do not to block the detergent dispenser opening. 2. Add detergent to the dispenser (see page 18). - Make sure to use only automatic dishwasher detergent. - Refer to "Using the dispenser" on page 18. 3. Close the door and Press the Power button. - When you press the Power button, the entire display turns on and off, and then the cycle light of the most recently finished cycle lights up. - If "Low Rinse" is illuminated, you should refill the rinse aid dispenser to improve washing and drying performance. 4. Select an appropriate cleaning cycle depending on the soil level of the dishes. (see page 11 and 22). - Press the appropriate cycle button. - When you press a cycle button, the cycle indicator light is illuminated. If you press the cycle button again, the light turns off and the cycle is canceled. - For information about selecting a cycle according to the soil level of the dishes, see "Cycle selector". 5. Press the Start/Pause button. - After you close the door and press the Start/Pause button, the dishwasher starts the selected cycle after a few seconds. - The door must be firmly closed. If the door is slightly ajar, the selected cycle will not start automatically. 6. When the wash cycle is completed. - The "Clean" light illuminates and the dishwasher sounds a chime. - The power is automatically turned off after 10 minutes. 12_ Using your dishwasher DW7933LRASR-00141A-02_EN.indd 12 2012-09-05 12:09:06

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

12_
Using your dishwasher
Using your dishwasher
BASIC GUIDELINES
1.
Open the door and load your dishes (see page 16).
-
Place dishes into the upper and lower racks.
-
Remove any food remains from the dishes before placing them in the rack(s).
-
After placing the dishes into the racks, rotate the nozzles by hand to check whether any of the
dishes will interfere with them.
-
Push the racks back so that they are in place.
-
Make sure the dishes do not to block the detergent dispenser opening.
2.
Add detergent to the dispenser (see page 18).
-
Make sure to use only automatic dishwasher detergent.
-
Refer to
“Using the dispenser”
on page 18.
3.
Close the door and Press the
Power
button.
-
When you press the
Power
button, the entire display turns on and off, and then the cycle light of the
most recently finished cycle lights up.
-
If “Low Rinse” is illuminated, you
should refill the rinse aid
dispenser to improve washing and
drying performance.
4.
Select an appropriate cleaning cycle depending on the soil level of the dishes. (see page 11 and 22).
-
Press the appropriate cycle button.
-
When you press a cycle button, the cycle indicator light is illuminated. If you press the cycle button
again, the light turns off
and the cycle is canceled.
-
For information about selecting a cycle according to the soil level of the dishes, see
“Cycle
selector”
.
5.
Press the
Start/Pause
button.
-
After you close the door and press the
Start/Pause
button, the dishwasher starts the selected cycle
after a few seconds.
-
The door must be firmly closed. If the door is slightly ajar, the selected cycle will not start
automatically.
6.
When the wash cycle is completed.
-
The “Clean” light illuminates and the dishwasher sounds a chime.
-
The power is automatically turned off
after 10 minutes.
DW7933LRASR-00141A-02_EN.indd 12
DW7933LRASR-00141A-02_EN.indd
12
2012-09-05
12:09:06
2012-09-05
12:09:06