Samsung Digimax L70 User Manual - Page 55

Setup menu [ Start up image ] ■ You can select the image that is first displayed on the LCD monitor whenever the camera is turned on. ● Start up image : [Off], [LOGO], [User Image] ◀ - Use a saved image for the start-up image with the [START IMAGE] in the [RESIZE] menu in the Sound Volume Shutter Sound play mode. Beep Sound - The start-up image will not be deleted by [DELETE] or [Format] menu. - The User images will be deleted by [Reset] Start Sound Start Image ◀ Set:MENU ◀ Exit:M menu. [ Formatting a memory ] ■ This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory. ● Sub menus [No] : The memory will not be formatted. [Yes] : A [Processing!] message appears and the memory will be formatted. If you run FORMAT in Play mode, a [No Image!] message will appear. Format Video Out USB Reset ◀ No Yes Set:MENU Exit:M Be sure to run [Format] on the following types of memory card. - A new memory card, or an unformatted memory card - A memory card that has a file this camera can't recognise or one that has been taken from another camera. - Always format the memory card using this camera. If you insert a memory card that has been formatted using other cameras, memory card readers, or PCs, you will get a [Card Error!] message. 《54》 [ Selecting Video out type ] ■ The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. ■ Connecting to an external monitor - Connect the camera to an external monitor with the supplied AV cable. Format Video Out USB Reset ◀ NTSC PAL Set:MENU Exit:M Yellow - Video White - sound