Samsung HT-P10 Instruction Manual - Page 24

Setting the DRC (Dynamic Range Compression), AV SYNC Setup, Dynamic Range Compression

Page 24 highlights

Setting the DRC (Dynamic Range Compression) You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. 1 In Stop mode, press MENU button. 2 Press Cursor button to move to 'Audio' and then press ENTER button. AV SYNC Setup GB Video may look slower than the audio if it is connected with digital TV. In this case, adjust the delay time of audio to optimal status to fit the video. 1 Press the MENU button. • Setup menu appears. 2 Press Cursor , buttons to move to 'Audio' and then press ENTER button. • 'Audio' menu appears. 3 Press Cursor button to move to 'DRC' and then press ENTER button. 4 Press Cursor , to adjust the 'DRC'. • The Cursor button is pressed, the greater the effect, and the Cursor button is pressed, the smaller the effect. 3 Press Cursor , buttons to move to 'AV-SYNC' and then press ENTER button. • AV-SYNC screen appears. 4 Press Cursor , buttons to select the Delay Time of AV-SYNC and then press the ENTER button. • You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status. SETUP 45 Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33

GB
46
SETUP
45
1
2
In Stop mode,
press
MENU
button.
Press Cursor
button to move to
‘Audio’ and then
press
ENTER
button.
The Cursor
button is pressed, the
greater the effect, and the Cursor
button is pressed, the smaller the effect.
3
4
Press Cursor
button to move to
‘DRC’ and then
press
ENTER
button.
Press Cursor
,
to adjust the
‘DRC’.
Press
RETURN
button to return to the previous level.
Press
MENU
button to exit the setup screen.
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
Setting the DRC
(Dynamic Range Compression)
Video may look slower than the audio if it is connected with digital TV.
In this case, adjust the delay time of audio to optimal status to fit the video.
AV SYNC Setup
Press
RETURN
button to return to the previous level.
Press
MENU
button to exit the setup screen.
'Audio' menu appears.
2
1
Setup menu appears.
AV-SYNC screen appears.
3
Press Cursor
,
buttons
to move to ‘Audio’ and then
press
ENTER
button.
Press Cursor
,
buttons
to move to ‘AV-SYNC’ and
then press
ENTER
button.
Press the
MENU
button.
4
You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
Press Cursor
,
buttons
to select the Delay Time of
AV-SYNC and then press the
ENTER
button.