Samsung HT-P10 Instruction Manual - Page 9
Connecting External Component, Connecting the FM Antenna - remote
View all Samsung HT-P10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Connecting External Component Connecting an External Analog Component Example: Analog signal components such as a VCR or TV. Audio Cable (not supplied) If the external analog component has only one Audio Out, connect either left or right. 1 Connect Audio In on the DVD player to Audio Out on the external analog component. • Be sure to match connector colors. 2 Press AUX on the remote control to select AUX. • You can also use the FUNCTION button on the main unit. The mode switches as follows: DVD/CD ➝ AUX ➝ FM. 15 Connecting the FM Antenna GB CONNECTIONS FM Antenna (supplied) FM antenna connection 1. Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal. 2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. Cooling Fan The cooling fan supplies cool air to the unit to prevent overheating. Please observe the following cautions for your safety. • Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise and may damage it. • Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result.) 16