Samsung LN-S4696D User Manual (ENGLISH) - Page 123
Installing the Wall Mount Kit (LN-S4696D), Installation Notes
View all Samsung LN-S4696D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Installing the Wall Mount Kit (LN-S4696D) Refer to the correct installation guide according to your wall bracket. This LCD TV accepts a 600 mm x 400 mm VESA-compliant mounting interface pad. Installation Notes 1. Contact a technician for installing the wall bracket. 2. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to perform the wall installation. 3. This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood. Parts (Wall attachment panel is sold separately. Check with your dealer.) Only use the components and accessories shipped with the panel. Plastic Hanger : 4EA Screw 11EA M4 X L20 Wall-Bracket Left: 1 Right: 1 Wall-Bracket Screw 11EA M8 X L40 Anchor : 11EA Accessories How to assemble the Wall Mount Bracket 1 Insert and tighten the Captive Screw in the direction of the arrow. When done, mount the wall bracket on the wall. Captive Screw Before drilling into the wall, check if the length between the two locking holes at the back of the product is correct. If the length is too short or long, loosen all or some of the 4 screws on the wall bracket to adjust the length. Length between the two locking holes Hinge (Left) Wall Bracket There are two hinges (left and right). Use the correct one. Hinge (Right) Check the installation diagram and mark the drill points on the wall. Use the 5.0 mm bit to drill holes deeper than 35 mm. Fix each anchor in the corresponding hole. Match each of the brackets and hinge holes to the corresponding anchor holes and insert and tighten the 11 screws . English-121 continued...