Samsung LN46B550K1F Quick Guide (ENGLISH) - Page 5

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver, Set-Top Box via Component cables - tv

Page 5 highlights

Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via Component cables TV Rear Panel DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) 1 Component Cable (Not supplied) 2 Audio Cable (Not supplied) 1 Connect a Component Cable between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB, PR] jacks on the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box). 2 Connect Audio Cables between the COMPONENT IN(1 or 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box). ➣ Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr (Red) for enhanced video quality. Be sure to match the component video and audio connections. For example, if connecting a Component video cable to COMPONENT IN 1, connect the audio cable to COMPONENT IN 1 also. ➣ Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration. ➣ When connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal to the cable. Connecting a VCR TV Rear Panel TV Side Panel VCR Rear Panel 1 Connect a Video Cable between the AV IN 1 [Y/VIDEO] or AV IN 2 [VIDEO] jack on the TV and the VIDEO OUT jack on the VCR. Connect Audio Cables between 2 the AV IN (1 or 2) jacks on the TV and the AUDIO OUT jacks on the VCR. 2 Audio Cable (Not supplied) 1 Video Cable (Not supplied) ➣ If you have a 'mono' (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of the TV. Alternatively, connect the cable to the 'R' jack. If your VCR is stereo, you must connect two cables. ➣ Each VCR has a different back panel configuration. ➣ When connecting a VCR, match the color of the connection terminal to the cable. ➣ When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow). English-

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

English-5
Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver
(Set-Top Box) via Component cables
TV Rear Panel
1
Component Cable
(Not supplied)
DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box)
²
Audio Cable (Not supplied)
1
Connect a Component Cable
between the COMPONENT IN (1 or
2) [Y, P
B
, P
R
] jacks on the TV and the
COMPONENT [Y, P
B
, P
R
] jacks on
the DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box).
²
Connect Audio Cables between the
COMPONENT IN(1 or 2) [R-AUDIO-L]
jacks on the TV and the AUDIO OUT
jacks on the DVD / Blu-ray player / Cable
Box / Satellite receiver (Set-Top Box).
Component video separates the video
into Y (Luminance (brightness)), Pb (Blue)
and Pr (Red) for enhanced video quality.
Be sure to match the component video
and audio connections. For example, if
connecting a Component video cable to
COMPONENT IN 1, connect the audio
cable to COMPONENT IN 1 also.
Each DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box) has a
different back panel configuration.
When connecting a DVD / Blu-ray player /
Cable Box / Satellite receiver (Set-Top
Box), match the color of the connection
terminal to the cable.
Connecting a VCR
1
²
If you have a ‘mono’ (non-stereo)
VCR, use a Y-connector (not
supplied) to connect to the right
and left audio input jacks of the
TV. Alternatively, connect the
cable to the ‘R’ jack. If your VCR
is stereo, you must connect two
cables.
Each VCR has a different back
panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable
(Yellow).
TV Rear Panel
²
Audio Cable
(Not supplied)
VCR Rear Panel
1
Video Cable
(Not supplied)
Connect Audio Cables between
the AV IN (1 or 2) jacks on the
TV and the AUDIO OUT jacks on
the VCR.
Connect a Video Cable
between the AV IN 1 [Y/VIDEO]
or AV IN 2 [VIDEO] jack on the
TV and the VIDEO OUT jack
on the VCR.
TV Side Panel