Samsung LT-P1745 Quick Guide (ENGLISH) - Page 4

victoryia 01-14 1/12/04 1:51 AM Page 13 I N S TA L L AT I O N Connecting a DVD Player The rear panel jacks on your TV make it easy to connect a DVD player to your TV. 1 Connect a set of audio cables between the L, R AUDIO INPUT jacks on the TV and the AUDIO OUT jacks on the DVD player. 2 Connect a video cable between the COMPONENT1 (Y, Pb, Pr) jacks on the TV and the Y, Pb, Pr jacks on the DVD player. Note: For an explanation of Component video, see your DVD player owner's manual. * Each external input source device has a different back panel configuration. Connecting a DVD Player or Set-Top Box to the TV with a DVI-D Cable 1 Connect a DVI-D cable between the DVI-I INPUT connector on the TV and the DVI connector on the DVD player/ Set-Top BOX. 2 Connect a set of audio cables between the PC AUDIO INPUT jack on the TV and the AUDIO OUTPUT jacks on the DVD player/ Set-Top BOX. Note: If you are using a DVI-D cable to connect 1. Be sure to connect the audio cable (sold separately) as shown above to get normal TV sound. 2. See Appendix "Display Modes" for supported resolutions. 3. The screen may have shifted to the right or to the left after connecting the cable. Don't adjust the screen position in a Digital Signal. 4. Each external input Source device has a different back panel configuration. English-4