Samsung ME21M706BAS/AA Installation Guide - Page 12
A. Outside Top Exhaust, Vertical Duct, B. Recirculating Non-vented, Ductless
View all Samsung ME21M706BAS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Step-by-step installation guide A. OUTSIDE TOP EXHAUST (VERTICAL DUCT) A1. INSTALLATION PROCEDURE FOR THE EXHAUST ADAPTOR AND PROPER DAMPER OPERATION CHECK Damper NOTE: You must attach the house duct to the exhaust adaptor after installation is complete. HHousseeDDuucct t Blower Plate Exhaust Adaptor Retaining Hooks Back of Microwave Oven 1. Slide the exhaust adaptor into place as shown in the diagram above. 2. Make sure the tape securing the damper is removed and damper pivots easily before you mount the microwave. CAUTION: You will need to make adjustments to assure proper alignment with your house exhaust duct after the microwave is installed. A2. ADJUST THE EXHAUST ADAPTOR After you have installed the microwave, you will need to open the top cabinet and adjust the exhaust adaptor so that you can connect it to the house duct. Damper Back of Microwave Oven For Side-toSide Adjustment, Slide the Exhaust Adaptor as Needed B. RECIRCULATING (NON-VENTED DUCTLESS) B1. ADAPTING THE MICROWAVE BLOWER FOR RECIRCULATION 1. Remove and save screw that holds blower plate to microwave. 2. Lift up the blower plate. Blower Retaining Screws Back of Microwave Oven NOTE: The exhaust adaptor with the damper is not needed for recirculating models. You may want to save them for possible future use. 12 SMH1927_XAA_DE68-04108A-05_EN.indd 12 6/19/2019 6:12:15 PM