Samsung ME21R7051 Installation Guide - Page 10
D. Aligning The Wall Plate
View all Samsung ME21R7051 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Step-by-step installation guide D. ALIGNING THE WALL PLATE HHooleleAA CCeenntteerrllininee nnoottcchheess DDrraw a VveerrticcaallLliine on the wtoohnfaeTlWlcotapaoblClmifnaraoebrmtiknaeCtbtheoenvtece.ernter of CL HoHroizrioznontatal lLLiinnee AArrea E CAUTION: Wear gloves to avoid cutting CAUTIfiOngNe:rsWoneasrhagrlpoveedsgetso. avoid cutting fingers on sharp edges. Hole B Hoorriizzoonntatal Ll iLniene DDrraawwaahoHroizroizntoanl tlianlelionnethoenwwaalllal lfornogmthe bottom of bthoett"oRmearoWf a"lRl TeeamrpWlatael"l. Template". 1. Draw a horizontal line on the wall at the bottom of the "Rear Wall Template". 2. Drill ⅝" holes for toggle bolts in 3 locations (Hole A, Hole B, Hole C) as shown in the illustration above. If the location of a hole lines up with a stud, drill a 3/16" hole for a wood screw. You cannot use a toggle bolt to attach the wall plate to a stud. NOTE: DO NOT MOUNT THE PLATE AT THIS TIME. 3. Holes A, B and C are inside area E. If none of these holes line up with a stud, find a stud in area E that lines up with a hole circle in Area E, and then drill a 3/16" hole into it for a wood screw. You must have at least one wood screw mounted firmly into a stud to support the weight of the microwave. Set the mounting plate aside. 10 ME21R7051SS_SG_AA_DE68-04577A-00_EN.indd 10 3/21/2019 12:37:17 PM