Samsung ME21R7051 Installation Guide - Page 12

Step-by-step installation guide A. OUTSIDE TOP EXHAUST (VERTICAL DUCT) A1. INSTALLATION PROCEDURE FOR THE EXHAUST ADAPTOR AND PROPER DAMPER OPERATION CHECK NOTE: You must attach the house duct to the exhaust adaptor after installation is complete. HHousseeDDuucct t The exhaust Adaptor and Damper are shipped assembled and attached to the filler-upper. 1. Slide the exhaust adaptor into place as shown in the diagram above. 2. Make sure the tape securing the damper is removed and damper pivots easily before you mount the microwave. CAUTION: You will need to make adjustments to assure proper alignment with your house exhaust duct after the microwave is installed. A2. ADJUST THE EXHAUST ADAPTOR After you have installed the microwave, you will need to open the top cabinet and adjust the exhaust adaptor so that you can connect it to the house duct. Blower Plate Damper Back of Microwave For Front-to-Back Adjustment, Slide the Exhaust Adaptor as Needed B. RECIRCULATING (NON-VENTED DUCTLESS) B1. ADAPTING THE MICROWAVE BLOWER FOR RECIRCULATION 1. Remove and save the screws that hold the blower plate to the microwave. 2. Lift up the blower plate. Back of Microwave NOTE: The exhaust adaptor with the damper is not needed for recirculating models. You may want to save them for possible future use. 12 ME21R7051SS_SG_AA_DE68-04577A-00_EN.indd 12 3/21/2019 12:37:17 PM