Samsung ML-1440 Service Manual - Page 81
Take the sensor out while you squeeze the both ends
View all Samsung ML-1440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Disassembly and Reassembly To replace the exit board : Unplug one connector from the controller board and remove one screw securing the board. Then release the wire from two holders and take the board out. To replace the Cap sensor : Remove two screws and take it out. To replace the fuser sensor : Remove two screws and take it out. To replace the actuator empty : Take the sensor out while you squeeze the both ends of the sensor. Actuator empty 3-14 Samsung Electronics
Disassembly and Reassembly
3-14
Samsung Electronics
To replace the exit board
:
Unplug one connector from the controller board and
remove one screw securing the board. Then release
the wire from two holders and take the board out.
To replace the fuser sensor
:
Remove two screws and take it out.
To replace the Cap sensor :
Remove two screws and take it out.
To replace the actuator empty :
Take the sensor out while you squeeze the both ends
of the sensor.
Actuator empty