Samsung ML 1740 User Manual (ENGLISH) - Page 16
Cancel button, On Line/Error, Toner Save, Printing demo Manual feeding, Source, Cleaning inside - software
UPC - 635753623338
View all Samsung ML 1740 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
LED Description If the On Line/Error and Toner Save LEDs blink, your 1 system has some problems. To solve the problem, see "Troubleshooting Error Messages" on page 6.18. Cancel button Function Description Printing demo page In Ready mode, press and hold this button for about 2 seconds until all LEDs blink slowly, and release. Manual feeding Press this button each time you load a sheet of paper in the manual feeder, when you select Manual Feed for Source from your software application. For detailed information, see "Using the Manual Feeder" on page 3.8. Cleaning inside printer In Ready mode, press and hold this button for about 10 seconds until all LEDs turn on, and release. After cleaning the printer, one cleaning sheet is printed. Canceling print job Press this button during printing. The On Line/Error LED blinks while the print job is cleared from both the printer and the computer, and then return to Ready mode. This may take some time depending on the size of the print job. In Manual Feed mode, you can't cancel the print job by pressing this button. For detailed information, see "Using the Manual Feeder" on page 3.8. Toner Save mode on/off In Ready mode, press this button to turn the Toner Save mode on or off. For detailed information, see page 4.8. INTRODUCTION 1.7