Samsung ML 4050N User Manual (ENGLISH) - Page 18

Graphic menu Use the Graphic menu to change settings affecting the quality of the printed characters and images. Item Resolution Darkness Image Enhance Explanation Specify the number of dots printed per inch (dpi). The higher the setting, the sharper printed characters and graphics. • If your print jobs are mostly text, select 600dpi- Normal for the highest quality printing. • Select 1200dpi-Best when your job contains bitmapped images, such as scanned photos or some graphics, that will benefit from enhanced line screening. You can lighten or darken the print on the page by changing the toner density setting. The Normal setting usually produces the best result. Use the Light toner density setting to save toner. This item enhances the print quality. • Normal: Doesn't enhance the quality. • Text Enhance: Enhances letters and simple figures. System Setup menu Use the System Setup menu to configure a variety of printer features. Item Date & Time Form Menu Select Form Explanation See page 10.6 and 10.8. Note • This menu item is available when the optional hard disk is installed. Language Power Save This setting determines the language of the text that appears on the control panel display and information printing. When the printer does not receive data for an extended period of time, power consumption is automatically lowered. You can set how long the printer waits before going to power save mode. Item Auto Continue Altitude Adj. Auto CR Job Timeout Maintenance Clear Setting Explanation This item determines whether or not the printer continues printing when it detects the paper unmatched to your paper setting. • Off: If a paper mismatch occurs, an error message will remain on the display and the printer will remain off-line until you insert the correct paper. • On: If the paper mismatch occurs, an error message will display. The printer will go offline for 30 seconds, then automatically clear the message and continue printing. You can optimize print quality according to your altitude. This item allows you to append the required carriage return to each line feed. Refer to the following samples: AA BB CC LF AA BB CC LF+CR You can set the length of time the printer waits before printing the last page of a print job that does not end with a command to print the page. When a print time-out occurs, the printer prints the page in the print buffer. This item allows you to maintain your printer. • Clean Drum: Cleans the OPC drum of the toner cartridge and produces a cleaning sheet with toner debris on it. • Clean Fuser: Cleans the fuser unit inside of the printer and produces a cleaning sheet with toner debris on it. • CLR Empty MSG.: Prevents the Toner Low Replace Toner message from appearing on the display. Once you have selected On, this setting will be permanently written to the memory of the toner cartridge, and this menu will be disappeared from the Maintenance menu. • Supplies Life: Allows you to check how many pages have been printed and how much toner are left in the cartridge. This menu item allows you to restore the printer's factory default settings. 2.4