Samsung MX-HS7000 User Manual - Page 8
Rear Panel, MX-HS6000 - remote
View all Samsung MX-HS7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Getting Started Rear Panel MX-HS6000 1 7 2 3 6 4 5 MX-HS7000 1 7 2 3 6 4 5 Cooling fan FM Antenna Terminals • The fan operates while the unit is powered on. 1 If you set the unit to the minimum volume, the fan won't operate. Secure a minimum of 6 inches (15 cm) of clear space on all sides of the fan when installing the product. AUX IN 2 Terminals 1. Connect the FM antenna to the FM antenna connector terminal. 2. Slowly move the antenna wire until you find a location where reception is good, then fasten 3 it to a wall or other rigid surface. 3. If reception is poor, you may need to install an outdoor antenna. To do so, connect an outdoor FM antenna to the FM socket on 1. Use an Audio Cable (not supplied) to connect AUX IN 2 on the product to Audio the rear of the system using a 75Ω coaxial cable (not supplied). Out on an external analog output device. • Be sure to match connector colors. 4 LED Terminals for Speaker Beat Waving. • If the external analog output device has 2 only one Audio Out jack, connect either left or right terminal. • Press the TUNER/AUX button to select AUX 2. • If the product is in AUX mode for more than eight hours and no buttons on the front panel or remote are pushed, the system will turn off. ONLY FOR SERVICE 5 • This jack is just for testing, please don't use it. POWER 6 • Insert only provided power cable. 2.1 CH Speaker Terminals (MX-HS6000) 2.2 CH Speaker Terminals (MX-HS7000) 1. To achieve the correct sound quality, when you connect the speakers, match the color of the speaker plugs to the color 7 of the speaker jacks. See below. • LEFT channel (marked ). • RIGHT channel (marked ). • Don't force the Purple SUBWOOFER connector into the White or Red speaker jack. 8 English