Samsung NQ70M7770DG/AA Installation Guide - Page 10
Electrical connection
View all Samsung NQ70M7770DG/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installation instructions 4. Lower the oven door to the fully open position. If the oven door does not open to a full 90°, repeat steps 1 through 3. 5. Locate the oven door hinge locks in the corners of the oven door, and rotate the hinge locks toward the oven cavity to the locked position. See Step 1 (illustration A) in the "Remove Oven Door" section for proper locked position. 6. Close the oven door. 7. When the hinges are properly installed and the door closed, there should be an even gap between upper and lower door. If one side of the oven door is hanging lower than the other, the hinge on that side is not properly installed. 8. Connect Wire Harness. Electrical connection For Combi. Ovens WARNING Electrical Shock Hazard Disconnect power before servicing. Use 8 gauge solid copper wire. Make sure to ground the oven. Failure to follow these instructions can result in death, fire, or electrical shock. This oven is manufactured with a neutral (white) power supply wire and a cabinet- connected ground (green or bare) wire twisted together. 1. Disconnect power. 2. Feed the flexible conduit from the oven A through the opening in the cabinet. 3. Remove junction box cover if it is present. 4. Install a UL listed or CSA approved A. UL listed or CSA approved conduit connector conduit connector to the junction box. 5. Route the flexible conduit from the oven to the junction box through a UL listed or CSA approved conduit connector. 6. Tighten screws on conduit connector. 7. See "Electrical Connection Options Chart" to complete installation for your type of electrical connection. Installation instructions 10 English Install_NQ70M6650D_DE68-04454A-00_EN.indd 10 1/9/2017 6:13:32 PM