Samsung PN58A650T1F User Manual (ENGLISH) - Page 96

Network Test You can test or confirm the network connection status after setting up the network. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. 2 Press the ▲ or ▼ button to select Wireless Network Setup, then press the ENTER button. 3 Press the ▲ or ▼ button to select Network Test, then press the ENTER button. ➣ The current network settings will appear. ➣ If no Access Point Select is set up, the test cannot be completed. (See page 95) Press the EXIT button to exit. Setup Network selection : Wireless Cable Network Setup Wireless Network Setup ► V-Chip Caption External Settings Entertainment : Off Energy Saving : Off PIP SW Upgade Wireless Network Setup Internet Protocol Setup : Auto Setup Network Test Access Point Select : AP1 IP Address Subnet Mask Gateway DNS Server :0 0 0 0 :0 0 0 0 :0 0 0 0 :0 0 0 0 Move Enter Return Network Test MAC Address IP Address, Subnet, Gateway, DNS Server Gateway Ping Domain Ping Network Test Completed. Your network is operating properly. If you still have a network problem, contact your network service provider. Return BN68-01532A-Eng.indb 96 English - 96 2008-04-18 오후 8:39:12