Samsung RB12J8896S4 User Manual - Page 24

Setting up your Refrigerator Setting up your Refrigerator Completing the Setup Now that you have your new refrigerator installed and in place, you are ready to set up and enjoy the full features and functions of the appliance. By completing the following steps, your refrigerator should be fully operational. If the refrigerator does not operate, first check the power plug and your fuse or circuit breaker box. If that does not resolve the issue, consult the troubleshooting section at the back of this user guide. If you have any further questions, contact a Samsung Electronics service center. 1. Confirm the refrigerator in an appropriate location with reasonable clearance between the wall and the refrigerator. Refer to installation instructions in this manual. 2. Once the refrigerator is plugged in, make sure the interior light comes on when you open the doors. 3. Set the temperature control to the coldest temperature and wait for an hour. The freezer should get slightly chilled and the motor should run smoothly. 4. After you plug in the refrigerator, it will take a few hours to reach the appropriate temperature. Once the refrigerator temperature is sufficiently cool, you can store food and drink in the refrigerator. After you plug in the refrigerator, the refrigerator chime will sound. Press the Freezer or Fridge button to turn the chime off. 24 English DA68-03174Z-00.indb 24 2015. 6. 19. �� 2:22