Samsung RF25HMEDBSR User Manual Ver.0.0 (English, French, Spanish) - Page 10

Accessories And, Required Tools, Removing The, Refrigerator Doors

Get Samsung RF25HMEDBSR PDF manuals and user guides View all Samsung RF25HMEDBSR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

49 1/4" (1254 mm) -RF28 48" (1221 mm) -RF25 60" (1525 mm) -RF28 54 1/4" (1380 mm) -RF25 ACCESSORIES AND REQUIRED TOOLS The following accessories are included with your refrigerator: CAUTION When moving your refrigerator To prevent floor damage, be sure the front adjusting legs are in the up position (above the floor). Refer to 'Adjusting the doors' on page 14. Hex wrench Fastener Required Tools (Not provided) You need the following tools to complete the installation of your refrigerator: Flat-blade screw driver(-) Control Lever Philips screwdriver(+) Flat-blade Socket wrench screwdriver(-) (13/32") (10mm) FLOORING For proper installation, you must place this refrigerator on a level, hard surface that is the same height as the rest of the floor. This surface should be strong enough to support a fully loaded refrigerator, or approximately 359 lbs (165 kg). To protect the finish of the flooring, cut a large section of the cardboard carton and place it under the refrigerator where you are working. When moving a refrigerator, you need to pull and push it straight forwards or back. Do not wiggle it from side to side. Pliers Allen wrench (3/16") (5 mm) REMOVING THE REFRIGERATOR DOORS For some installations, you need to remove the fridge doors and freezer drawer so you can move the refrigerator to its final location. Do not remove the doors/drawers if you don't need to. If you do not need to remove the refrigerator doors or drawers, go to 'Adjusting the Level' on page 14. If you need to remove the doors and drawers. continue below. Before removing the doors or drawers, make sure you read the following warnings: WARNING Disconnect power to the refrigerator before removing the door or drawer. • Be careful not to drop, damage, or scratch the doors/drawer while removing them. English - 10 DA68-02952A-00.indb 10 13. 10. 25. 2:54

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
English - 10
60” (1525 mm) -RF28
60” (1525 mm) -RF28
54 1/4” (1380 mm) -RF25
54 1/4” (1380 mm) -RF25
49 1/4” (1254 mm) -RF28
49 1/4” (1254 mm) -RF28
48” (1221 mm) -RF25
48” (1221 mm) -RF25
CAUTION
When moving your refrigerator
To prevent floor damage, be sure the front
adjusting legs are in the up position (above the
floor).
Refer to ‘Adjusting the doors’ on page 14.
Flat-blade screw
Flat-blade screw
driver(-)
driver(-)
Control Lever
Control Lever
FLOORING
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the floor. This surface
should be strong enough to support a fully loaded
refrigerator, or approximately 359 lbs (165 kg). To
protect the finish of the flooring, cut a large section
of the cardboard carton and place it under the
refrigerator where you are working. When moving
a refrigerator, you need to pull and push it straight
forwards or back. Do not wiggle it from side to
side.
ACCESSORIES AND
REQUIRED TOOLS
The following accessories are included with your
refrigerator:
Hex wrench
Fastener
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
Philips
screwdriver(+)
Flat-blade
screwdriver(-)
Socket wrench
(13/32”) (10mm)
Pliers
Allen wrench
(3/16”) (5 mm)
REMOVING THE
REFRIGERATOR DOORS
For some installations, you need to remove the
fridge doors and freezer drawer so you can
move the refrigerator to its final location.
Do not
remove the doors/drawers if you don’t need
to.
If you do not need to remove the refrigerator
doors or drawers, go to ‘Adjusting the Level’
on page 14. If you need to remove the doors
and drawers. continue below. Before removing
the doors or drawers, make sure you read the
following warnings:
WARNING
Disconnect power to the refrigerator before
removing the door or drawer.
• Be careful not to drop, damage,
or scratch the doors/drawer while
removing them.
DA68-02952A-00.indb 10
DA68-02952A-00.indb
10
13. 10. 25.
2:54
13. 10. 25.
2:54