Samsung RF267AERS User Manual (user Manual) (ver.1.0) (English) - Page 13

Position the Top Table

Page 13 highlights

01 SETTING UP ReattaChing the RefRigeRatoR dooRs 4. C onnect the water line ( 5 ) and then insert a cliRpedoCnlipthe coupler with pulling tube. Co(1n/4n"e) ct the one connector( 4 ) on left side door and two connectors ( 3 ) at each side 4 of the top cap. Dispenser Door Tube The clip is enveloped inside of the top cap. 3 Cabinet Tube Dispenser Door Tube 5 Cabinet Tube Dispenser Door Tube Cabinet Tube Red Clip (1/4") The water linReed(Cl5ip ) must be fully inserted to the marked line to prevent Cabinet Tube CAUTION water (1/4") leakage from the dispenser. 5. P osition the Top Table( 2 ) in place. With a Philips head screwdriver, insert and tighten the 3 screws into the Top Table. With the door opened, reinsert the Top Table cap( 1 ) and close the doors.  When reattaching the top table, make sure that the wires are not pressed or damaged by the top table. 1 3 coupler 2 DA68-01812G.indb 13 Setting Up _13 2009.8.10 9:7:58 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84

Setting Up
_13
01 SETTING UP
REATTACHING THE REFRIGERATOR DOORS
3
4
Red Clip
(1/4”)
Dispenser
Door Tube
Cabinet
Tube
5
3
5. Position the Top Table(
2
) in place.
With a Philips head screwdriver, insert and tighten the 3
screws into the Top Table. With the door opened, reinsert the
Top Table cap(
1
) and close the doors.
When reattaching the top table, make sure that the
wires are not pressed or damaged by the top table.
2
1
4. Connect the water line (
5
) and then insert a
clip on the coupler with pulling tube.
Connect the one connector(
4
) on left side
door and two connectors (
3
) at each side
of the top cap.
The clip is enveloped inside of the top cap.
The water line (
5
) must be fully inserted to the marked line to prevent
water leakage from the dispenser.
CAUTION
coupler
DA68-01812G.indb
13
2009.8.10
9:7:58 AM