Samsung RF31FMEDBBC User Manual Ver.0.4 (English, French, Spanish) - Page 12
Re-attaching The, Refrigerator Doors, Disassembling The Flex
View all Samsung RF31FMEDBBC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
RE-ATTACHING THE REFRIGERATOR DOORS To reattach the fridge doors after you have moved the fridge to its final location, assemble the parts in reverse order. 3. Press the locking tab and separate the Wire Connector. 1. The Water Line must be fully inserted into the center of the transparent coupler (Type A) or the Guide Lines (Type B) to prevent water leakage from the dispenser. 2. Insert the clip in the install pack and check that it holds the line firmly. Type A Type B When reassembling it, be sure to connect CAUTION the wire harness. If it is not connected, the Flex Room does not work. Dispenser Center of Transparent coupler clip A (1/4") (6.35 mm) The Guide Lines clip A (1/4") (6.35 mm) 4. Remove 1 hex head bolt from each side with a socket wrench (10mm). DISASSEMBLING THE FLEX DOOR 1. Take out the Flex Zone ( 1 ) by lifting it up. 5. Lift up the Flex door from the rails. 1 2. Take off the cover ( 2 ) w/harness with a flatblade screwdriver (-). 2 Putting too much food into the freezer CAUTION drawers can prevent the freezer from closing completely and can cause frost build-up. 12_ setting up