Samsung RF31FMEDBBC User Manual Ver.0.4 (English, French, Spanish) - Page 39
Foldable Shelf, Vegetable & Fruit Drawers, Flex Zone
View all Samsung RF31FMEDBBC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
3. Foldable Shelf To remove - After removing the Shelf Front, lift up the Shelf and remove it. To re-install - Hook the Shelf on the Angle Frame and re-attach the Shelf Front to the Foldable Shelf. 5. Flex Zone To remove the Flex Zone - Pull the Flex door out to full extension. Lift the Flex Zone up, pulling it to your body with both hands. To re-install the Flex Zone - Open the Flex door to full extension. Tilt the front of the Flex Zone up, place the back of the Flex Zone onto the rails, and then lower the front until the whole Zone rests on the rails. 02 OPERATING After sliding the foldable shelf in and CAUTION folding it, the Shelf Front can be removed for your convenience. If you use the self without removing, be careful of its possible separation. 4. Vegetable & Fruit Drawers To remove - Pull the drawer out to full extension. Tilt up the front of the drawer and pull straight out. To re-install - Insert the drawer into the frame rails and push back into place. When the Flex Zone or LED lighting is not working, check the connectors [ ( 1 ), ( 2 ) shown below ] for cracks or leaks. 2 The drawers need to be removed before CAUTION the glass shelf above them can be lifted out. 1 1. Refer to page 12 for disassembly instructions. 2. Open the cap cover rail with a flat-blade screw driver. operating _39