Samsung SCB-3001 User Manual - Page 18

Operating Your Camera ·CRT : Please select this menu item when using a CRT monitor. You can change the PED level, color gain in the sub menus. ·USER : Please use this menu item when using a monitor other than standard ones. You can change the gamma, PED level and color gain in the sub menus. ● V PS(Virtual Progressive Scan) :This is an advanced technology that reproduces a sharp progressive image. This is appropriate to high quality recording and file transfer via the Internet. ·OFF : Selects 2:1 Interlaced Scan as the Imaging Method. ·ON : Selects Progressive Scan as the Imaging Method. ● R EVERSE :You can reverse the picture. ·OFF : You don't reverse the picture. ·H-REV : You can flip the picture horizontally on the screen. ·V-REV :Y ou can flip the picture vertically on the screen. ·HV-REV : You can flip the picture horizontally and vertically on the screen. ● P IP(Picture in Picture) : Displays a full-size image along with the thumbnail to provide more detailed information. The position of the thumbnail is adjustable. ● D-ZOOM : You can use a digital zoom of x1 ~ x16. ● FONT COLOR:You can change the OSD font color. (White, Yellow, Green, Red, Blue) ● SHARPNESS : As you increase this value, the picture outline becomes stronger and clearer. Adjust this value appropriately depending on the sharpness of the picture. ● RETURN : S elect this to save the settings for the IMAGE ADJ menu and to return to the SPECIAL menu. COLOR CCD CAMERA 34 User Guide Notes • W hen the V-REV or H-REV mode is enabled, the text on the screen does not flip. • If you increase the SHARPNESS level too high, the picture may become distorted or noise may appear. CAM TITLE : If you enter a title, the title will appear on the monitor.  1) If the SPECIAL menu screen is displayed, use the Function Setup button so that the arrow indicates 'CAM TITLE'. 2) Set it to 'ON' by using the Function Setup button. 3) Press the Function Setup button. 4) U se the Function Setup button to move to a desired letter and select the letter by pressing the Function Setup button.  CAMERA TITLE SETUP ABCDEFGHIJKLM NOPQRSTUVWXYZ abcdefghijklm nopqrstuvwxyz -.0123456789 ←→CLR POS END Repeat this to enter multiple letters. You can enter up to 15 letters. 5) E nter a title, move the cursor to 'POS' and press the Function Setup button. The entered title appears on the screen. Select the position to display the title on the screen by using the Function Setup button and press the Function Setup button. When the position is determined, select 'END' and press the Function Setup button to return to the SPECIAL menu. FRONT DOOR Notes • W hen the CAM TITLE menu is 'OFF', no title will be displayed on the monitor screen even if you enter one. • a nd Numbers are available in this mode. • If you move the cursor to CLR and press the Function Setup button, all the letters are deleted. To edit a letter, change the cursor to the bottom left arrow and press the Function Setup button. Move the cursor over the letter to be edited, move the cursor to the letter to be inserted and then press the Function Setup button. COLOR CCD CAMERA 35 User Guide